We finally exchanged on our house (yippee!). We have a month or two overlap on our rental property, and whilst we have the opportunity to do a little building work without living in the middle of it, I'm keen to make use of it.
We would like to remove what I imagine is a load bearing wall. Its a bog-standard 1920s semi, e.g. front door, staircase straight ahead, front room with a dining room behind. We'd like to knock through from the living to the dining room.
Anyone got any hints or tips. We'll be doing it all properly - building regs etc. We will be paying someone else to do the work, a bulging disc in my back and lifting RSJ's don't seem to mix!
Anyone recommend a good builder in the Reigate area of Surrey? What about weight calculations? Do builders have a standard figure or do I need to find a structural engineer as well?
Thanks in advance,
Adam
We would like to remove what I imagine is a load bearing wall. Its a bog-standard 1920s semi, e.g. front door, staircase straight ahead, front room with a dining room behind. We'd like to knock through from the living to the dining room.
Anyone got any hints or tips. We'll be doing it all properly - building regs etc. We will be paying someone else to do the work, a bulging disc in my back and lifting RSJ's don't seem to mix!
Anyone recommend a good builder in the Reigate area of Surrey? What about weight calculations? Do builders have a standard figure or do I need to find a structural engineer as well?
Thanks in advance,
Adam