• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Sold Record Power DS300

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

imageel

Established Member
UKW Supporter
Joined
27 May 2011
Messages
678
Reaction score
498
Location
Essex
Virtually unused, bought for a specific project in mind but in practice was not suitable.
Probably has been run less than 30mins and is fitted with a loop & hook adaptor and comes complete with 8 unused 180 grit loop discs and one original stick-on 80-grit
Looking for £200 £150 ono so £150 under current new offers.
Prefer collection from near Colchester due to its ~30kg weight
front.jpg
 

Attachments

  • adaptor.jpg
    adaptor.jpg
    114.7 KB
  • side.jpg
    side.jpg
    153.1 KB
  • table.jpg
    table.jpg
    409.6 KB
  • top.jpg
    top.jpg
    196 KB
Last edited:
Tempted .. if you could include P&P in that I could be very tempted
 
I might be able to do a deal if we went halves or similar - at 30kg bare it breaches most carriers weight limits, especially as I would need to crate it to ensure safe delivery and this pushes it into stratospheric £50+ pallet charges.
If you are amenable I could detach the cast table and see if I can secure both into two parcels thus bringing the costs back into manageable figures.
Let me know and I can see if I can keep the main weight below 30kg crated....
 
See what you can come up with regarding removing the table (I assume a simple enough job) and securing into two packages that will ship without potential for breakage in transit, if it's possible, and we can take it from there
 
ok -let me work out how it might break down weight wise and I'll let you know - may be a couple of days as have a lot going on at present
/Ed
 
No deal - I weighed it on my bathroom scales and its 36Kg - Record say it's 33kg so removing the cast table isn't going to bring it under pallet weight charges - sorry,
/Ed
 

Latest posts

Back
Top