Printer Table

[DaveL]

I bought a new (to us) laser printer, its a HP laserjet 4000 with jet direct card and duplexer unit /geek mode off, sorry got carried away there. What that means is its big, quite fast, can print on both side of the paper and I can connect it to the network for any one of our machines to use.

I did mean to take some in progress pictures but got carried away and it was made before I had remember to take the camera out to the shop.
The best bit about this is I 'found' all of the timber in the spare ends, no money spent, just the tuit of course. :roll:

Its made from two bits of mahogany that were given to me for fire wood. :shock: The shelves are ply glued into slots cut in the legs and edged with solid wood strips. The top is located with 4 #20 biscuits. It has had three coats of finishing oil and now stands at the top of our stairs.

Not a pretty piece of furniture but very functional.

 

[Aragorn]

Nice job Dave.
This is from your spare ends pile?? I gotta see your proper stock pile :lol:

 

[Newbie_Neil]

Hi Dave

That looks really good.

You should, of course, have got the colour version. :lol:

Cheers
Neil

 

[DaveL]

You should, of course, have got the colour version. :lol:

Come on now I thought I was doing OK at £60 for the LJ4000 with the extra bits installed.
We have the colour LJ4500 at work, I would not give it house room, very slow and it goes through consumables as if money is no object. :twisted:

 

[DaveL]

This is from your spare ends pile??

Aragorn,

I did say it was given to me as fire wood, well here are two fence posts from the latest batch. They looked a bit different to the others and on cutting the rotten end off one I appear to have been given 3 3/4" square mahogany posts.

Well some of the 6' will end up in the workshop wood burner but most will find its way into a project of some sort. 8)