Post a photo of the last thing you made

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mines the same, only thing she really wants is a summer house but I just can't be pineappled to build one and can't afford to buy one.
Print a pic of the recent one by Dr Bob and put an IOU on it...!🤣🤣🤣🤣🤣

I can hear it now "All you do is turn turn, turn and you won't build me a summer house!"
 
Some nice work done there peeps, so I better post a quick job done for a friend of a friend of mine, not quite a mates rate job, but it got me working with some real wood and not glued wood dust 🤣
Asked to make a 7m shelf and a sideboard. Christ ! Oak costs a fortune in the UK £3500, then asked about doing it in Douglas redwood hulp £1800, so found a timber mill south of Oxford- Chiltern timbers, and they showed me some English Ash. 😳 Boy it was gorgeous, and a decent thickness at a good price too!
So, ash it was and this is what I knocked up in 10 days
 

Attachments

  • IMG_20220205_173218.jpg
    IMG_20220205_173218.jpg
    98 KB
  • IMG_20220206_164923.jpg
    IMG_20220206_164923.jpg
    143 KB
  • IMG_20220207_100946.jpg
    IMG_20220207_100946.jpg
    91.9 KB
  • IMG_20220125_135331.jpg
    IMG_20220125_135331.jpg
    188.7 KB
  • IMG_20220116_142902.jpg
    IMG_20220116_142902.jpg
    98.2 KB
  • IMG_20220201_150747.jpg
    IMG_20220201_150747.jpg
    193.9 KB
A simple magnetic knife rack.
Zebrano wood with an Osmo Polyx finish.
I cut a 3mm veneer off the back, using a band saw. Routed a 12mm wide slot along its length stopping 20mm short of each end.
glued in Neodymium magnets and sealed over them with silicone sealant.
glued the veneer back on and once dry, routed keyhole slots for fixing to the wall.
not a huge undertaking but the wife is happy with it.
F0289093-FAB7-47B5-997C-B55962A99A86.jpeg
 
nowt flash or fancy, but my first bit of "furniture". base for my table saw. not sure if it's a good idea or not, but added dust collection below the saw (via the port at the back [3d printed]). when i get the saw on it i'll draw up a "y" type piece in cad and print it to connect to the main saw dust collection.
 

Attachments

  • 20220211_144357.jpg
    20220211_144357.jpg
    103.8 KB
  • 20220213_122939.jpg
    20220213_122939.jpg
    93.7 KB
  • 20220202_144057.jpg
    20220202_144057.jpg
    64.1 KB
Blades up it is👍
As a matter of interest, why? They're less likely to slide off with the handles up.
If you think about how you approach it to take a knife off, you lift your hand up to the rack. Slight misjudgement and you're in for a belter of a surprise :LOL:
They aren't going to slide, but if they did the magnets arent sufficiently strong and should be upped.
 
Last edited:
A total guess but I'd say probably because it's easier to grab the handles and safer with blades up and you could possibly catch/cut your hand with blades pointing down.

Personal security considerations recommends against knife blocks and racks in the home; leaving weapons out for intruders to use... believe it or not, an intruder using a knife he snatched off a knife rack in your kitchen could argue self defence, which would be less likely to succeed if he brought a weapon with him. Even the act of opening a kitchen drawer to retrieve a knife demonstrates intent, which again makes a self defence argument less viable.

Never mind the risks of a domestic argument very easily escalating.

Just saying... 🙄
 
Personal security considerations recommends against knife blocks and racks in the home; leaving weapons out for intruders to use... believe it or not, an intruder using a knife he snatched off a knife rack in your kitchen could argue self defence, which would be less likely to succeed if he brought a weapon with him. Even the act of opening a kitchen drawer to retrieve a knife demonstrates intent, which again makes a self defence argument less viable.

Never mind the risks of a domestic argument very easily escalating.

Just saying... 🙄
You can never be too careful on this evening of all evenings...

The box of malteasers just wasn't good enough....!🤣😡🤣😡
 
Back
Top