MattRoberts
Established Member
Oh nice - with the gears? I've bought the plans for the John heisz ones, but not got around to making it yetDennisCA":1urmyf11 said:
Post a photo of the last thing you made
- Thread starter DTR
- Start date
Help Support UKworkshop.co.uk:
thetyreman
Established Member
that kit looks awesome, I'd kill for a kit like that in my recording studio
Phil Pascoe
Established Member
He looks very worried ... is he heading for the Faroes? 
LancsRick
Established Member
Just finished two experiments which will be birthday presents for my mum. When my parents redid their kitchen, they had a few things made out of black walnut, and kept the offcuts. Since my mum has said she wanted a cheeseboard and matching breadboard, I spotted a present opportunity!
Both are very simple as they're my first attempts into their respective techniques. For the cheeseboard, it's the largest thing I've turned (15"), as I usually do spindlework. So I kept it simple, focused on the finish. For the breadboard, all I had was smaller pieces, so I needed to do a block laminate effect - again, my first time doing that as an end product. Kept it simple, focused on the finish.
I'd welcome any comments and criticism! Oh, they've been finished with danish oil.
http://imgur.com/a/RHTFk
Cheers!
Both are very simple as they're my first attempts into their respective techniques. For the cheeseboard, it's the largest thing I've turned (15"), as I usually do spindlework. So I kept it simple, focused on the finish. For the breadboard, all I had was smaller pieces, so I needed to do a block laminate effect - again, my first time doing that as an end product. Kept it simple, focused on the finish.
I'd welcome any comments and criticism! Oh, they've been finished with danish oil.
http://imgur.com/a/RHTFk
Cheers!
Love it!NazNomad":w3tjyr4u said:Inspired by the Puffin that Doris carved ...
thetyreman
Established Member
I created a silver birch cutting board, finished today with some de-waxed shellac, this wood was in a skip near me! so it was completely free.
I was planning on giving it away to a friend, but now I might have to keep it.
I used a coping saw, rasp a no4 stanley plane and sandpaper to make this, no power tools needed.
I was planning on giving it away to a friend, but now I might have to keep it.
I used a coping saw, rasp a no4 stanley plane and sandpaper to make this, no power tools needed.
Attachments
Chip shop
Established Member
Knocked this together today with off-cuts of Jewsons' finest rubbish 'joinery grade' reds. Notice the short T&G board...it's only for me so I don't mind too much.
custard
Established Member
thetyreman":2o52dh3n said:
Blimey, that's unbelievably good!
The precise and even rounding to all the edges (including on the end grain and around those internal and external corners), the absolute symmetry of the handle, the tightness of the glue lines, the flatness of the surface, the way the jointed boards are perfectly balanced on each side, the complete absence of any tell tale flats or facets from a rasp, and even the professional jauntiness of the design.
I'm blown away, I really am!
=D>
After using a temporary screwed-to-a-bit-of-MDF-in-a-workmate job for more years than can strictly be considered "temporary", I made one of these:
And to celebrate, one of these - to replace the temporary-old-glass-placemat which we'd used for more years than could strictly be considered "temporary":
Since I know it's all you guys really care about, and also since I need the practice, I did the corners with dovetails:
And then stuffed things in it so it's useful:
And to celebrate, one of these - to replace the temporary-old-glass-placemat which we'd used for more years than could strictly be considered "temporary":
Since I know it's all you guys really care about, and also since I need the practice, I did the corners with dovetails:
And then stuffed things in it so it's useful:
Attachments
monkeybiter
Established Member
Those are some very impressively tight dovetails!
Isn't that Sapele?
Was there a lot of splintering to deal with?
How thick is your brass plate?
End of 'Q's
Isn't that Sapele?
Was there a lot of splintering to deal with?
How thick is your brass plate?
End of 'Q's
