Pipe clamps - where to buy?

[Monkey Mark]

After watching one of Jay Bates videos (for anyone who has not seen his vids, they are certainly worth a watch https://www.youtube.com/user/Jayscustomcreations) I started trying to find some of the pipe clamps he sometimes uses. Like the ones below. They seem poplular in the US but I cant find any over here.

Does anyone know where they can be purchased from? I ask as, where I work, we have plenty of 20mm and 25mm steel conduit and a few sizes of high pressure pipe in varying lengths so, should the heads not be too expensive and of the correct fitting, I could have clamps of many different sizes.

Anyone shed any light on this?

 

[memzey]

Axminster do them.

 

[marcros]

if you can get some bought back from the USA, they are very cheap. probably not worth shipping though.

i don't think that conduit will be the correct size- you need 3/4" or 1/2" BSP pipe, depending on the size of the clamps. I am sure that I have seen that the conduit is not strong enough either.

 

[HOJ]

http://www.axminster.co.uk/axminster-trade-clamps-cast-pipe-clamp

I use them all the time, you can buy the 3/4 tube from pipe/plumbers merchants in 6 meter lengths, but you will need a die set to thread the pipe ends
if you buy some couplers as well you will have clamps that can extend to limitless ends.

 

[Monkey Mark]

That's great, missed them on there.

I have plenty of the pipe at work as well as couplers and a die set.

When pay day, I think I'll invest.