For some time I've been thinking of buying a lathe so I waited for the January sales to come along and got as far as clicking away and filling the basket but I hadn't got the courage to take the final plunge because I had a little doubt. What if I really don't take to turning. After dithering about I decided to get an old cheapie and was fascinated by this old thing and it's attachments. It runs but the motor pulley chatters as the woodruff key is not fitting properly The attachments are caked in crud but after a few hours the morticing jig had been cleaned up and freed off. The planer/thicknesser needs bearings but i'm in no rush as I've got plenty scrubbing with wire wool to do first. Will post more pics when it's a bit more presentable.
Old Moth
- Thread starter v8 Fossil
- Start date
Help Support UKworkshop.co.uk:
Old.bodger
Established Member
Great choice. Had one for years. Just keep the main bearing oiled.
The next time I top up it will be a heavier oil as the 5/40 I used almost fell through.
Going into town this week to see if I can get some chisels if they have any and if not it will be on line keeping away from cheapo no brand name rubbish.
Going into town this week to see if I can get some chisels if they have any and if not it will be on line keeping away from cheapo no brand name rubbish.
Phil Pascoe
Established Member
If it's like the ML8 it's designed to leak oil, just keep it lightly lubricated with a fairly light oil.
Robbo3
Established Member
The manual states SAE 30 or equivalent.
If required you can download the manual & a brochure from this thread
- Coronet Major Wood Lathe - Advice Wanted
If required you can download the manual & a brochure from this thread
- Coronet Major Wood Lathe - Advice Wanted
clogs
just can't decide
Never found a metal moth.....v interested to see more photo's.....
looks like a lucky find....
thought u ment this kind.....only ever seen one in my life.....wild.....
looks like a lucky find....
thought u ment this kind.....only ever seen one in my life.....wild.....
Thanks for all the info. It's been fascinating reading about all the other models including the attachments and instructions. They must have been quite a machine back then. The SAE 30 oiling will be a regular duty every time I use it. The old ML8 reminds me of school days and there's still plenty of them around.
It's been a busy weekend with all the cleaning and there's still a lot more to do. The mortice attachment now moves freely after being thoroughly doused with plus gas and given a little gentle persuasion. As you can see there's a lot of work yet to be done including a new
power cable and hopefully I can revive the old planer.
It's been a busy weekend with all the cleaning and there's still a lot more to do. The mortice attachment now moves freely after being thoroughly doused with plus gas and given a little gentle persuasion. As you can see there's a lot of work yet to be done including a new
power cable and hopefully I can revive the old planer.
Attachments
Similar threads
