oak box

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johnf

Established Member
Joined
16 Jul 2008
Messages
578
Reaction score
0
Location
Sunny Sussex
Hi I thought I would post this as its freezing outside '
A small oak box I made to house our key & pens ect 200mm square 50 mm high 7mm thick sides & bottom corner box joints cut with woodrat.

P1010416.jpg


P1010417.jpg


P1010418.jpg
 
oh very nice John and will eventually make it on my list when I get down this far. ;)
 
Nice one sir. =D>

Dovetails or a finger joint? Hard to tell from the pics.
 
joiner_sim":1bh2fc8t said:
A nice simple box there, looking great!

How did you chamfer the top exactly?

Hi joiner I chamfered the top on the bench saw made a right angle jig clamped it to the sliding table clamped the top to it tilted the blade and ran it through the saw.
 
Back
Top