Reply to thread

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

My 700 only delivers when using the sloppy setting which on the 700 is a very sloppy setting. On sheet goods I can use my FC tools alignment jig (NEW) Domino Alignment Jig XL System Deluxe; (900 LONG PLATE) - FC Tools and if there were zero issues with alignment then Frank would not have had such a market for this jig. It is not all about the accuracy but for me the repeatability, no good getting three or four out of five bang on with one out. I have probably been spoilt by my dowelmax, it can allow me drill dozens of dowel holes and end up with no issues with alignment or closing joints. If you think how precise a line of say fifteen dowels needs to be in order to get a joint to close then my dowelmax delivered 100% so total confidence in it. My new Jessem dowel jig is also delivering exceptional results but not using alignment marks, much better to use rulers with stops fom the end of the jig.

<blockquote data-quote="Spectric" data-source="post: 1629900" data-attributes="member: 21600"><p>My 700 only delivers when using the sloppy setting which on the 700 is a very sloppy setting.&nbsp; On sheet goods I can use my FC tools alignment jig <a href="https://fctools.co.uk/product/domino-alignment-jig-system-daj-dlux/" target="_blank">(NEW) Domino Alignment Jig XL System Deluxe; (900 LONG PLATE) - FC Tools</a>&nbsp;&nbsp; and if there were zero issues with alignment then Frank would not have had such a market for this jig.&nbsp;&nbsp; It is not all about the accuracy but for me the repeatability,&nbsp; no good getting three or four out of five bang on with one out.&nbsp; I have probably been spoilt by my dowelmax,&nbsp; it can allow me drill dozens of dowel holes and end up with no issues with alignment or closing joints.&nbsp; If you think how precise a line of say fifteen dowels needs to be in order to get a joint to close then my dowelmax delivered 100% so total confidence in it.&nbsp; My new Jessem dowel jig is also delivering exceptional results but not using alignment marks,&nbsp; much better to use rulers with stops fom the end of the jig.</p></blockquote><p></p>

[QUOTE="Spectric, post: 1629900, member: 21600"] My 700 only delivers when using the sloppy setting which on the 700 is a very sloppy setting. On sheet goods I can use my FC tools alignment jig [URL="https://fctools.co.uk/product/domino-alignment-jig-system-daj-dlux/"](NEW) Domino Alignment Jig XL System Deluxe; (900 LONG PLATE) - FC Tools[/URL] and if there were zero issues with alignment then Frank would not have had such a market for this jig. It is not all about the accuracy but for me the repeatability, no good getting three or four out of five bang on with one out. I have probably been spoilt by my dowelmax, it can allow me drill dozens of dowel holes and end up with no issues with alignment or closing joints. If you think how precise a line of say fifteen dowels needs to be in order to get a joint to close then my dowelmax delivered 100% so total confidence in it. My new Jessem dowel jig is also delivering exceptional results but not using alignment marks, much better to use rulers with stops fom the end of the jig. [/QUOTE]

Verification