Reply to thread

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

Been out of the workshop with a bad back again but today managed to get out there again but all I managed to do was........
........
.... Drop a right b@llock I had sized to fit the two outer doors and proceeded to fit the barrel hinges, this type

I even made a jig to do it. So I drilled the two outer doors then the corresponding holes in the cabinet everything lined up perfectly well I got the first door on and two more of the hinges fitted in to the other door. It was at this point I went to open the door already fitted and it would only open about 30 degrees So for the next few hours were spent drilling out the hinges and boy they were tight :evil: So after re plugging the holes I'm back to where I was this morning and I've had to order a larger size set of hinges

<blockquote data-quote="Lord Nibbo" data-source="post: 248328" data-attributes="member: 1156">Been out of the workshop with a bad back again but today managed to get out there again but all I managed to do was........ ........ .... Drop a right b@llock I had sized to fit the two outer doors and proceeded to fit the barrel hinges, this type <img src="http://www.isaaclord.co.uk/image/products/medium/34111503.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /> &nbsp;I even made a jig to do it. So I drilled the two outer doors then the corresponding holes in the cabinet everything lined up perfectly well I got the first door on and two more of the hinges fitted in to the other door. It was at this point I went to open the door already fitted and it would only open about&nbsp; 30 degrees&nbsp; &nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite10" alt=":oops:" title="Oops!&nbsp; &nbsp; :oops:" loading="lazy" data-shortname=":oops:" />&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite10" alt=":oops:" title="Oops!&nbsp; &nbsp; :oops:" loading="lazy" data-shortname=":oops:" />&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite10" alt=":oops:" title="Oops!&nbsp; &nbsp; :oops:" loading="lazy" data-shortname=":oops:" /> So for the next few hours were spent drilling out the hinges and boy they were tight&nbsp; :evil:&nbsp; So after re plugging the holes I&#039;m back to where I was this morning and I&#039;ve had to order a larger size set of hinges&nbsp; <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite15" alt=":cry:" title="Crying&nbsp; &nbsp; :cry:" loading="lazy" data-shortname=":cry:" /></blockquote>

[QUOTE="Lord Nibbo, post: 248328, member: 1156"] Been out of the workshop with a bad back again but today managed to get out there again but all I managed to do was........ ........ .... [b]Drop a right b@llock[/b] I had sized to fit the two outer doors and proceeded to fit the barrel hinges, this type [img]http://www.isaaclord.co.uk/image/products/medium/34111503.jpg[/img] I even made a jig to do it. So I drilled the two outer doors then the corresponding holes in the cabinet everything lined up perfectly well I got the first door on and two more of the hinges fitted in to the other door. It was at this point I went to open the door already fitted and it would only open about 30 degrees :oops: :oops: :oops: So for the next few hours were spent drilling out the hinges and boy they were tight :evil: So after re plugging the holes I'm back to where I was this morning and I've had to order a larger size set of hinges :cry: [/QUOTE]

Verification