Need belt for the mini lathe

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dye29

Member
Joined
29 Sep 2021
Messages
7
Reaction score
0
Location
north yorkshire
Hi all newbie here but in need of help i have a mini lathe a craft supplies mvs1000 and the drive belt has failed .
This is approx 4mm wide vbelt and 440-450mm long but cant find a new one any ideas please ive tryed using a oring but too much stretch for it thanks in advance ste
 

Attachments

  • 08340AF3-52B4-4F91-B110-F696F7C00916.jpeg
    08340AF3-52B4-4F91-B110-F696F7C00916.jpeg
    132.7 KB
And if that fails, simplybearings might have what you want. Keep the old belt if you can for measurement and comparison.
 
that looks like a round belt to me. They are available in various metric diameters, and you simply cut them to length and fuse the two ends together.

My local supplier (transmission supply) is also a bearing store, and they refer to it as round polyurethane belting.

I use them on m engraving machines/jewellers lathes and other light duty stuff.

In the pix attached the largest is 8mm, the smaller 4 mm

Eric in the col;onies
 

Attachments

  • 20211007_170323.jpg
    20211007_170323.jpg
    188.6 KB
I would google around subject Sewing Machine drive belts might have to be a round belt but should be fine or speak to Motionco.co.uk - good luck
 
If you haven't already and you are still stuck, it might be worth asking lathes.co.uk.

Is that the belt or a power cord in the picture, it looks round?
Is this a different company? good luck
 

Latest posts

Back
Top