voyager
Established Member
Making space in the workshop for my new lathe so the trusty Myford needs a new home. No real need to introduce the ML7 as it has a cult following for a reason. as you can see there is a fair bit of tooling that goes with it, in addition to whats in the pics i have also a bigger 4jaw chuck, a set of metric change wheels and a spare toolpost.
cross slide is fitted with a Dickson QCTP. lathe is fitted with a Newton Tesla fwd/rev speed controller and the bigger optioned motor.
beds and crosslides are firm and smooth with no play. X and Y axis will have the Glass scales fitted but you will need a DRO readout as i am moving this over to my new lathe.
willing to let this go for £1500 collection only.
lathe will split from the stand and should go in an estate car or small van.
cross slide is fitted with a Dickson QCTP. lathe is fitted with a Newton Tesla fwd/rev speed controller and the bigger optioned motor.
beds and crosslides are firm and smooth with no play. X and Y axis will have the Glass scales fitted but you will need a DRO readout as i am moving this over to my new lathe.
willing to let this go for £1500 collection only.
lathe will split from the stand and should go in an estate car or small van.
