Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="swagman" data-source="post: 1148052" data-attributes="member: 4319">The front of the mouth opening and wear angle have both been squared up. The sole of plane has been dressed back to flat with the double iron in tension. (Little change noted in flatness). The sides and top have been cleaned up to remove all the lay-out markings. The mortise housing for the rear tote has been completed and the hide glued in position. The glue will be left to harden overnight. Both ends of the planes stock still need to be cleaned up with a block plane, then its onto forming the profile bevels.<a href="http://s1009.photobucket.com/user/swagman001/media/wooden%20jointer%20build/_DSC0107_zpsg0xfqknq.jpg.html" target="_blank"><img src="http://i1009.photobucket.com/albums/af219/swagman001/wooden%20jointer%20build/_DSC0107_zpsg0xfqknq.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a><a href="http://s1009.photobucket.com/user/swagman001/media/wooden%20jointer%20build/_DSC0108_zpsntvjxz6a.jpg.html" target="_blank"><img src="http://i1009.photobucket.com/albums/af219/swagman001/wooden%20jointer%20build/_DSC0108_zpsntvjxz6a.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a></blockquote>