RogerS
Established Member
I'm trying to work out the angle of a slope that drops 18mm per metre. I keep getting about 1 degree which seems very small. Any mathematical brains out there that can check if I'm right, please?
Thanks
Thanks
jasonB":3oinbhxj said:The Tan of the angle will be the opposite over the adjacent.
Tan x = 18/1000
Tan x = 0.018
x = 1.0312 degrees
Jason
jasonB":1p5q3coh said:The Tan of the angle will be the opposite over the adjacent.
Tan x = 18/1000
Tan x = 0.018
x = 1.0312 degrees
Jason
RogerM":dv5dypwz said:but I think you'll find this is as close as a woodworker will need! :lol:
jasonB":1b7d7or1 said:RogerM":1b7d7or1 said:but I think you'll find this is as close as a woodworker will need! :lol:
I think you will find Roger S is playing with pipework not wood
Bit too shallow an angle for my liking, make sure you put a rodding point at the end of the run :wink:
Jason
Enter your email address to join: