Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
That is a good thread to refer us to.The one caveat I'd offer, having specified and selected lighting for an engineering factory is that the recommended levels may be a bit low.If you do detail work like machining, 700 to 1000 lux at the machine is not unreasonable. That may be using task lights where the precision work is always done in the same place but we lit an entire bay at 500 lux because it was used for mechanical assembly and installation. The improved light was worth every penny.For marking out, hand cutting joints, etc it is nice to have lots of light.
That is a good thread to refer us to.
The one caveat I'd offer, having specified and selected lighting for an engineering factory is that the recommended levels may be a bit low.
If you do detail work like machining, 700 to 1000 lux at the machine is not unreasonable. That may be using task lights where the precision work is always done in the same place but we lit an entire bay at 500 lux because it was used for mechanical assembly and installation. The improved light was worth every penny.
For marking out, hand cutting joints, etc it is nice to have lots of light.
