Reply to thread

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

Doug I realise the fridge coming is with sliders on the door but if anyone else looks at the thread I'll explain how I did mine and got similar effect. If using imagination to swap the extra surround panelling and pretend it's a face frame, I used a standard cabinet within a cabinet effectively (although they are Panels) allowing the standard hinges on the fridge to be used. It has worked well for the last few years. Some dummy butts would give the illusion required. I prefer the less cluttered look.
The side benefit was pulling the fridge freezer slightly forward giving more ventiation space at rear and allowing the worktop front to run in flush with the cabinet, I don't like to see that step out that you can end up with. Balanced fridge freezer with cooker microwave other side. However I am an amateur neither craftsman or kitchen designer even though I did this one.
Put the stainless backsplash up temporary until we could decide what to do coloured glass etc and never changed it

<blockquote data-quote="Woody Alan" data-source="post: 1731525" data-attributes="member: 855">Doug I realise the fridge coming is with sliders on the door but if anyone else looks at the thread I&#039;ll explain how I did mine and got similar effect. If using imagination to swap the extra surround panelling and pretend it&#039;s a face frame, I used a standard cabinet within a cabinet effectively (although they are Panels) allowing the standard hinges on the fridge to be used. It has worked well for the last few years. Some dummy butts would give the illusion required. I prefer the less cluttered look.The side benefit was pulling the fridge freezer slightly forward giving more ventiation space at rear and allowing the worktop front to run in flush with the cabinet, I don&#039;t like to see that step out that you can end up with. Balanced fridge freezer with cooker microwave other side. However I am an amateur neither craftsman or kitchen designer even though I did this one.Put the stainless backsplash up temporary until we could decide what to do coloured glass etc and never changed it</blockquote>

[QUOTE="Woody Alan, post: 1731525, member: 855"] Doug I realise the fridge coming is with sliders on the door but if anyone else looks at the thread I'll explain how I did mine and got similar effect. If using imagination to swap the extra surround panelling and pretend it's a face frame, I used a standard cabinet within a cabinet effectively (although they are Panels) allowing the standard hinges on the fridge to be used. It has worked well for the last few years. Some dummy butts would give the illusion required. I prefer the less cluttered look. The side benefit was pulling the fridge freezer slightly forward giving more ventiation space at rear and allowing the worktop front to run in flush with the cabinet, I don't like to see that step out that you can end up with. Balanced fridge freezer with cooker microwave other side. However I am an amateur neither craftsman or kitchen designer even though I did this one. Put the stainless backsplash up temporary until we could decide what to do coloured glass etc and never changed it [/QUOTE]

Verification