Engraving

[Brian Charles]

how is this type of engraving achieved and what type of machine would be best not just for the side but also just for all types of engraving

 

[Sachakins]

That looks like it's been laser engraved.
Either with diode or co2 or fibre laser.

 

[ChaiLatte]

That looks like it's been laser engraved.

A close up of the letter might narrow it down. From the current distance, it is not obvious if the base of the letter is flat and burnt, as from a laser, or V-carved and filled, from a rotating tool.

Whatever machine it is, it would need enough Z-travel (up and down) to cope with 'flat' and 'edge' work.

 

[Brian Charles]

A close up of the letter might narrow it down. From the current distance, it is not obvious if the base of the letter is flat and burnt, as from a laser, or V-carved and filled, from a rotating tool.

Whatever machine it is, it would need enough Z-travel (up and down) to cope with 'flat' and 'edge' work.

Thanks I will look at these types of machines
I think the engraving is probably done on the side and then laminated together