Elu MOF 96E, no longer 'trendy' with respect to guide bushes

[pe2dave]

Current Trend guide bushes will not fit the MOF96E.
has anyone tried the 'fits the world' model please?
Does it work well?

 

[Hornbeam]

There are other guide bushes than trend which will fit.
https://www.axminstertools.com/accessories/power-tool-accessories/routing/router-guide-bushesI use the brass screw set which I bought for about half the ax price from somewhere else

 

[Hornbeam]

These should work
https://www.facebook.com/marketplac...wse_serp:008a613e-e5e6-4c03-aa2d-014ff2d14878

 

[Sideways]

There are other guide bushes than trend which will fit.
https://www.axminstertools.com/accessories/power-tool-accessories/routing/router-guide-bushes

And I have a couple of the Axy own brand stainless ones (scroll down the same page) that fit just fine.

 

[pe2dave]

And I have a couple of the Axy own brand stainless ones (scroll down the same page) that fit just fine.

On the MOF96?

 

[Hornbeam]

I have MOF96E and have a couple of trend. 1 axi stainless and the brass screwed set which all fit

 

[pe2dave]

I have MOF96E and have a couple of trend. 1 axi stainless and the brass screwed set which all fit

This one? With the base and adapter kit? Getting rather spendy?

Trend confirm their unibase fits the MOF96E. I'll believe them.

 

[Hornbeam]

This one? With the base and adapter kit? Getting rather spendy?

No this one, but I didnt buy from Axminster I bought somewhere else for about £25

https://www.axminstertools.com/ujk-...CCyYK0kG-cg2adt_qlnrr2PxZj_4kroYaAoM0EALw_wcB
The individual Axminster stainless bushes arent much more than Trend and are much better quality

 

[pe2dave]

No this one, but I didnt buy from Axminster I bought somewhere else for about £25

https://www.axminstertools.com/ujk-...CCyYK0kG-cg2adt_qlnrr2PxZj_4kroYaAoM0EALw_wcB
The individual Axminster stainless bushes arent much more than Trend and are much better quality

Odd. I have that set and no way I can get it to fit the MOF96?
Do you use an adaptor / alternative base plate?

 

[Hornbeam]

Hi you are correct. I have a separate adapter plate which is a leigh 710

https://www.axminstertools.com/leig...utm_content=2266&tagrid=59197713&glCountry=GB
Ian

 

[pe2dave]

Current Trend guide bushes will not fit the MOF96E.
has anyone tried the 'fits the world' model please?
Does it work well?

If anyone else asks.
The Trend 'unibase' fits (after lots of trial and error, with 1000 holes and 2000 bolts!) the MOF96E and centres nicely with the provided jig.