drill chuck

[cowboy682]

where is the best place to buy and what size do l need for a AXMINSTER CRAFT AC370WL VAR SPEED WOODTURNING LATHE meaning the chuck that goes on the tail end of the lathe

 

[marcros]

you ultimately need a 2MT. That is either a chuck and an arbour to suit (with 2MT as the taper) or a complete one.

Model Engineering and engineering tools online from RDG Tools Ltd Home Page (Engineering Tools) Tel 01422 885069 /884605 doesnt look bad. It is useful if it will go slightly bigger but I couldn't easily find one.

https://www.machinery4wood.co.uk/Ch..._3wDG1apWXWHaqtwOX0pGJQPMYFo_PNAaAgxnEALw_wcB
Drill Chucks - Tools & Machines - Yandle & Sons Ltd

all will do the jobs (watch for the 1MT options on the last link). It depends a bit if you need other bits whilst ordering or whether you just need the chuck.

 

[cowboy682]

you ultimately need a 2MT. That is either a chuck and an arbour to suit (with 2MT as the taper) or a complete one.

Model Engineering and engineering tools online from RDG Tools Ltd Home Page (Engineering Tools) Tel 01422 885069 /884605 doesnt look bad. It is useful if it will go slightly bigger but I couldn't easily find one.

https://www.machinery4wood.co.uk/Ch..._3wDG1apWXWHaqtwOX0pGJQPMYFo_PNAaAgxnEALw_wcB
Drill Chucks - Tools & Machines - Yandle & Sons Ltd

all will do the jobs (watch for the 1MT options on the last link). It depends a bit if you need other bits whilst ordering or whether you just need
the chuck.

thanks for the info looks like it will be RGB not far from me