Phil Pascoe
Established Member
If you can see the light your oilstone's dished.
Chipped edges on new planes and do new planes need sharpening before use?
- Thread starter silz
- Start date
Help Support UKworkshop.co.uk:
I have replied to your message. This weekend would work for me and I was already planning to spend part of tomorrow sharpening my planes so it would be ideal
TheTiddles
Established Member
I’m astonished anyone’s been as supportive as they have been given his previous conduct, still, we’ve seen what Peter’s after sales support looks like, I’m inclined to buy from him in future, if only I actually needed any more tools
Aidan
Aidan
Last edited:
Tony Zaffuto
Established Member
Woodworking vendors are generally tops! You guys across the pond have many, as we do here in the states. Most new to our hobby or profession need a helping hand, and my hat is off to all many of you have offered!
pe2dave
Established Member
Paul Sellers uses a compromise. On 8" diamond whetstones, 'rocks' (by fractions of an inch) from one end to 'tother, hence (sort of) producing a gradual bevel? Finish with a strop. Works for me, from my hand axe through to plane blades and 1/8" chisels.
Doug B
Shy Tot
It’s good to see Peter going above & beyond what a lot of tool sellers would, as a very happy customer of his I’m not surprised. Well done Peter.
Last edited by a moderator:
Seb was around this morning and we had a nice chat and got some 2 of the planes up to scratch and working again. He came across well and to be honest I think it just felt a bit intimidated by the reactions here to which I believe was a genuine question even if it didn't come across like that.
He has just started working with planes and if anything was just misguided by the information that premium planes come ready to use out of the box, which is partially true if you know what you are doing but they certainly don't come with the skill you will need to acquire as you use them.
He has just started working with planes and if anything was just misguided by the information that premium planes come ready to use out of the box, which is partially true if you know what you are doing but they certainly don't come with the skill you will need to acquire as you use them.
And BTW the reason we only 2 planes ready was time nothing else. I have a record wet stone sharpener which is the slowest thing in the world
good on you for sorting him out.
AJB Temple
Finely figured
Well done for helping him. He had at least three offers of help in this thread, which is not intimidating. I think perhaps he trapped himself in his threads by setting out a position of some experience, when in fact he is a novice. Hopefully he will get over it and will add to the forum as the novice journey is also interesting and useful
Trevanion
Greatest Of All Time
A man who cannot take honest and fair advice will have a slow and troublesome journey to the top of the mountain.
Very true, but often our personal pride becomes it's own obstructive enemy.
billw
The Tattooed One
Well, everyone knows in woodworking you should think twice, post once.
- Joined
- 6 Jun 2011
- Messages
- 2,974
- Reaction score
- 884
Tony Zaffuto
Established Member
Would also have merit to new handplane users as to what to expect from new tools. Might not be a bad idea for an upcharge, for tool dealers to hone blades, do a basic set-up of the chipbreaker, take a few shavings and include said shavings in the package.
In any case new users need to be instructed in what to expect, otherwise similar insinuations (like those of the OP in this thread) might continue to be made. That is the shame of what has happened to this thread.
I will PM you
Done sorry for the length. In short, and for the benefit of this thread, I believe it was user error and inexperience
It's something of a cop-out for tool dealers and resellers to simply add their cut of the profit to an item that isn't really in a fit state to work properly. What else would you buy that wasn't in a fit condition to be used without significant buyer work to make it functional? In most cases, you'd return it not because it wasn't fixable (by you or anyone else) but because it hadn't already been fixed by the purveyor when it could have been.
Lie-Nielsen and Veritas produce planes and chisels that are ready to work out of the box - even though a savvy user can improve the edge by way of a micro-bevel or a quick hone to super (rather than merely functional) sharpness. Why don't all manufacturers of planes and chisels do this? One answer is that it would increase the cost. But that's true of any sold-article (the vast majority) that comes ready to use. The cost includes making it function without the buyer having to perform the final manufacturing processes.
Surely the manufacturer should make their wares not just fit for purpose but also ready for purpose. Manufacturers of most things do this, including tool manufacturers. You don't have to finally shape the end of your screwdriver or sharpen the teeth of your circular saw blade after you remove them from the packaging.
We seem to have got used to the notion that some things must be ready to use but others are for the user to make ready. What differentiates the two modes other than some peculiar tradition? Is there a reason that many plane blades and chisels should often come unready to be used whilst most other things are ready?
Eshmiel
