CAD Gallery

[Steve Maskery]

Hi all,
Well I went and suggested a CAD Gallery, and then never did anything about it, so I'll set the ball rolling now. All my models will have been created in SketchUp, unless otherwise stated.

All contributions gratefully received, but, please, can we keep this thread just as a Gallery? If you have any comments or queries about the models or CAD or anythng else, please post in a new thread, so that this stays nice and clean.

Mods: Do you think General is the right place for this? If you would prefer it to be in Off-Topic I'm very happy for you to do the necessary.

Cheers
Steve

 

[Steve Maskery]

Oval coffee table, ash.

Breakfast table, ash and burr elm

Hall cupboard, cherry

Mirror, maple and bubinga

 

[SketchUp Guru]

Cool Idea Steve. Lets see what I can come up with.
Dust Collector. (This was drawn as simply as possible to use it for laying out my shop.)

Outfeed Stand based on the one Lee Valley sells.

Bench

Cradle Boat Hull. I made this just before my son was born. Walnut transoms, keel, knees. Planked in pine. Ribs and gunwales in white ash.

Dining room table based on a photo of a Thomas Moser table.

Room divider screen

Small child's sled

 

[LyNx]

 

[SketchUp Guru]

Internal mainsheet idea exploration

WoodRat with HipDog's stops

Dining room lamp

Stickley sideboard

Float WoodRat

Julie K

Folding ramp

 

[Neil]

Tool cabinet

 

[houtslager]

My gawd, the quality of the drawings here simply beggers belief makes my attempts very poor.Well, here are a few of mine.
very first drawing - finished after 400 minutes

second - a simple one by all accounts :wink:

This is where I now live, and where I will be working from once its built 8)

A final tune up, of my "dream Workshop"

 

[aldel]

New box rail for WoodRat

 

[SketchUp Guru]

Sailing Canoe

Leg based on Greene and Greene design for the Blacker House in California.

Steering mechanism in my sailboat.

 

[Nick W]

Design for revolving bookcase

Click here to see finished article.

 

[CYC]

The wardrobe I built for my daughter (newborn at the time):

 

[Mike.C]

Oh p-off the lot of you. If there's one thing i hate is flash gits who can do something i can't do. :evil: :sign3:

absolutely great =D> Where can i sign up :?: Can you get a trail program, you know the sort of thing "Try before you buy"

Cheers

Mike

 

[houtslager]

ha, score one to SU, just heard from a client -
they liked what I made with SU, and are ordering
it to be made.Final choice on timber to be made over
Easter WOO HOO ! ccasion5:

 

[aldel]

Ok here is another simple 'Rat mortise rail.

A zipped up sketchup model is here http://www.aldel.co.uk/WorkHolding2.htm

cheers, aldel

 

[mailee]

Not as professional as most on here,but these are mine.

 

[mailee]

Five bar gate. Well four actually.

Download model here http://woodgen.com/sketchup/five_bar_gate.skp

 

[mailee]

Due early May.

 

[aldel]

Hey,
I like that, its a good drawing. The proportions are good.

aldel

 

[houtslager]

Well I have the go ahead, and a deposit from an old client to make this

[/url]

Only problem is without 3phase, I can't power up my machinery :?
but then I can use the ol'festool 75 8) looks like it has an awfull lot of cutting to do !

So, only got it do make in 10 weeks :lol:

wish me luck folks.

all the best fronm HS in a "sunny " Germany.

 

[Shady]