burr walnut jewlery box (wip)

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

shim20

Established Member
Joined
30 Mar 2008
Messages
549
Reaction score
0
Location
hadleigh,suffolk
started to make this last week sometime already spent 16+ hours on it and lots more to go :? , let me know what you think, c&c very welcome :)
sorry for the pictures they were taken on my phone.
DSC00058.jpg

DSC00075.jpg

DSC00076.jpg

DSC00077.jpg

DSC00079.jpg

DSC00082.jpg

DSC00083.jpg
 
That looks excellent Ben. Looking forward to seeing some pictures taken with a real camera :) .

Cheers, Ed
 
Ironballs":olxxw9fs said:
Looks good, an explanation of your veneering would be useful too. Is this the birthday present?

yes this is the bithday present, she said she would like a jewlery box a while ago so i went for that in the end, yes sorry its all done with animal glue the veneers were soaked for a while then using 2 bits of mdf i made a press to flatten the veneer,(used clamps to hold flat) i put the veneer between sheets of newspaper to soak up the water and changed the paper daily did this for 3 days, the veneer was like leather was nice to lay, the trick is to get the concistency of the glue right hard to explain with out showing you, but this makes a massive diffrence, laying it on the curve of the lid was tricky but like most things give it time and keep working it. the inlay was quite easy to lay, hope this has made some sense :lol: .
 
The veneering looks great.
However, why did you go to the time and effort of dovetail jointing the sides if you was only going to cover them up? When I made my first bit of "fancy joinery" (if thats the word for it, opposed to making windows and doors!) It was also a jewellery box. I used a nice hardwood for it, so no veneering and I just used a housing joint on the sides. Its still holding together now, so just as strong a joint, however looking back as the joints were visible, wish I'd had a go at dovetailing!
 
i did that because thats how alot of the traditional jewlery boxes were made, plus id rather have used them anyway, they dont take tht long to cut, and you know its going to last for a very long time.
 
Looking good, shim. Love the look of that burr walnut. :)

Why does one of your cramps have a piece of string tied to it... :?: :D
 
OPJ":3pic7f9d said:
Looking good, shim. Love the look of that burr walnut. :)

Why does one of your cramps have a piece of string tied to it... :?: :D

ha ha, the handsrews just had enough pressure on them but there quite heavy and one wanted to fall off, so tied it to the other :lol: , also just given it 3 coats of polish and its come alive :D , just waiting for a jew bit to come in the post to finish it off
 
right update time, again sorry for the poor pics from my phone camera, i will get my girlfriend to take some proper ones of it when its done, as its for her and she a photographer :) , spent 34 hours on it now it been french polished and just need to pick up the mirror glass tommorw to go in the lid and thats it all done :)
DSC00085.jpg


there is another tray under the one you see, that has a division.
DSC00088.jpg


i have to say thanks to ed for recomending the brusso hinges there expensive but very nice and finish the box off nicely, as i said will get some better pics of these and box itself
 
Looks like a beautiful box, with some excellent veneering work - you should be delighted with that end result.

One criticism if I may, is that the red lining looks awful to my eye - far too gaudy, and yet for some reason loads of people use red felt inside jewellery boxes. Maybe its just me....

Anyway, excellent work Ben

Cheers, Ed
 

Latest posts

Back
Top