Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Used to use it when we had to contractually and was trained by them how to use it all etc. but it has always been stupid expensive.I use timbabuild ERC 10 mostly. My idea is that mainly I replace the timber with new timber and only use the timbabuild as a splicing adhesive/ filler. Using this strategy you need a lot les of the stabiliser as well.The repair care strategy was always more to remove the rot with a die grinder and replace it with the resin, this uses a lot of resin. and a lot of their little sanding disks etc.Also check out the 3C sealants own brand which looks very similar to the repair care stuff. Not tried it yet but might give it a go.These are all epoxy based products and are fundamentally made by adding various fillers to a liquid epoxy, you can (if you can be bothered ) make up your own from something like the west system 105 with various fillers like coloidal silica, microfibres and micro balloons to make it behave how you want.
Used to use it when we had to contractually and was trained by them how to use it all etc. but it has always been stupid expensive.
I use timbabuild ERC 10 mostly. My idea is that mainly I replace the timber with new timber and only use the timbabuild as a splicing adhesive/ filler. Using this strategy you need a lot les of the stabiliser as well.
The repair care strategy was always more to remove the rot with a die grinder and replace it with the resin, this uses a lot of resin. and a lot of their little sanding disks etc.
Also check out the 3C sealants own brand which looks very similar to the repair care stuff. Not tried it yet but might give it a go.
These are all epoxy based products and are fundamentally made by adding various fillers to a liquid epoxy, you can (if you can be bothered ) make up your own from something like the west system 105 with various fillers like coloidal silica, microfibres and micro balloons to make it behave how you want.
