bradleyheathhays
Established Member
Although pressurized oxygen chambers have been around for decades apparently the first anti-aging study using them has just been published and the results are amazing to say the least. What's now known is that this kind of oxygen therapy elongates what are known as your cell's telomeres, the shortening of which are directly related to, and may possibly be the cause of aging. To make a long story short, influencing telomere length is THE holy grail of anti-aging research.
So what's involved in a treatment session is getting yourself into a pressurized vessel not unlike a large propane tank. 100% oxygen is pumped in until 2.5 - 3 atmospheres is reached. Depending on what condition the therapy is prescribed for these sessions can last anywhere from 20 min to 2 hours. The benefits of pressurized oxygen have been long established and are far too long to list, from wounds that won't heal to stroke and pre-stroke victims.
The problem is that, although this therapy is technically fairly simple, it remains extremely expensive and can only be had through a doctor's prescription. Until this research was published a few months ago it wasn't known just how beneficial this therapy could be to the average person and has been reserved for patients with debilitating conditions. So my question is, how do I make one of these things happen?
Here's an example of a homemade version I think is very doable...
Hyperbaric Oxygen Chamber (homemade)
So what are your all's ideas on making one of these? Where would you go to find a chamber like that for starting material?
So what's involved in a treatment session is getting yourself into a pressurized vessel not unlike a large propane tank. 100% oxygen is pumped in until 2.5 - 3 atmospheres is reached. Depending on what condition the therapy is prescribed for these sessions can last anywhere from 20 min to 2 hours. The benefits of pressurized oxygen have been long established and are far too long to list, from wounds that won't heal to stroke and pre-stroke victims.
The problem is that, although this therapy is technically fairly simple, it remains extremely expensive and can only be had through a doctor's prescription. Until this research was published a few months ago it wasn't known just how beneficial this therapy could be to the average person and has been reserved for patients with debilitating conditions. So my question is, how do I make one of these things happen?
Here's an example of a homemade version I think is very doable...
Hyperbaric Oxygen Chamber (homemade)
So what are your all's ideas on making one of these? Where would you go to find a chamber like that for starting material?