Ags 10. Riving knive attachment.

[Ian Mellin]

Please can someone please post some pictures of the attachment and how it attaches to the saw and operates. I have the attachment but done know if I'm missing some parts, so the more photos the merrier.

Kind Regards
Ian.

 

[Lons]

Please can someone please post some pictures of the attachment and how it attaches to the saw and operates. I have the attachment but done know if I'm missing some parts, so the more photos the merrier.

Kind Regards
Ian.

Better if you post some pics of your saw and which attachments you have as there are many variations.

 

[Ian Mellin]

 

[Hornbeam]

See attached link that shows how it all fits together. I know this is a slightly different model but it shows where the bolts should be
I had a 10 ags about 15 years ago and think it was the same but Deema may give you more details
https://www.sawandbits.com/rebuilding-wadkin-bursgreen-12ags/

 

[Fitzroy]

Only the newer AGS10 has this design of riving knife, many of us on here only have the older type. Page 10 of the Manual shows a diagram if that helps, look at the motor mounting assembly image. This youtube video has the machine with this riving knife around the 11min mark, not super clear but enough perhaps to help.

Fitz

 

[Ian Mellin]

Hello the previous riving knife attachment at the start of this post is not correct for my saw, mine is one of the more modern saws with a cantilever mechanism. Does anyone have the manual for this model of machine as the ones on the Wadkin site make no mention of this that i can find.

Any help much appreciated.

 

[Ian Mellin]

I finally found the manual after alot of digging. The Cantilever mechanism is clearly shown on the AGS-P manual attached if anyone is interested.

Kind Regards
Ian.