Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I've been there having to lift some boards though not due to the release plastic. I can tell you you'll have to use a sharp scraper on the back of the boards as the underlay sticks like s**t to a blanket!I was able to gently lift the whole length of the room to about 400mm high at the front by putting supports underneath, I had 2 lads to help, then I managed to cut along the joint underneath after measuring distance from above. It wasn't exact and certainly not easy but seemed the best solution at the time for me. 4 boards back might be a bit much for you.The underlay can be stretched and I tried to do that initially but couldn't manage without causing damage to the top edges as the T&G joints were tight..Bob
I've been there having to lift some boards though not due to the release plastic. I can tell you you'll have to use a sharp scraper on the back of the boards as the underlay sticks like s**t to a blanket!
I was able to gently lift the whole length of the room to about 400mm high at the front by putting supports underneath, I had 2 lads to help, then I managed to cut along the joint underneath after measuring distance from above. It wasn't exact and certainly not easy but seemed the best solution at the time for me. 4 boards back might be a bit much for you.
The underlay can be stretched and I tried to do that initially but couldn't manage without causing damage to the top edges as the T&G joints were tight..
Bob
