W woodfarmer Established Member Joined 10 Sep 2013 Messages 1,261 Reaction score 18 Location poitiers 8 Feb 2015 #21 One of three shims I made 1mm, 1.5mm and 2mm The smaller holes were drilled then sized using a taper drill (from screwfix). Machining 1mm aluminium plate on a lathe is not entirely simple. Attachments P1020546.JPG 167.2 KB
One of three shims I made 1mm, 1.5mm and 2mm The smaller holes were drilled then sized using a taper drill (from screwfix). Machining 1mm aluminium plate on a lathe is not entirely simple.
