Search results

I used a jig (borrowed) for the corners and biscuits for the little extension, all joints sealed using silicon. The joints where done 15 years ago, as you can see they are still OK today. All the cuts were done with a router and a relatively new bit.

Hi Devonwoody, (I maybe missing the point), The bevel box will give the Blade tilt with respect to the table, it cannot measure the angle of the blade with respect to the mitre slot.

I have been using the Axminster Bevel Box for about 18 months or so. I originally purchased it thinking it was a "would be nice gadget (it was on offer); I was so wrong, I now use it whenever I set the blade, tilt the band saw table etc. I have found it is accurate too, if the Bevel Box reads...

Merry Christmas and all the best in the New Year. Mike

I agree with both Noel & Scott. Scott, Anti break-out block, could you drop a posting with a picture when you have tried it out? I am intrigued.. Mike

Hi Grumf & Gav, welcome aboard. I bought DW712 last year and am very happy with it and have never regretted spending the money on-it. The only modification I have made was to purchase a fine cut blade for it. It is so nice to cut mitres and bevels that meet up cleanly without any unsightly...

Hi Alan, You will be pleased to know I can see your clock, it looks very nice. Mike

There I was out in the garden at 0630 this morning hiding the eggs for my two daughters when I noticed one of them looking out of their window – I quickly dashed behind a bush but knew the game was up :( . The curtain dropped and I ran to the next tree before she looked out of the window...

Hi Tim, at £899.00 + VAT a piece I can see us all rushing out to buy one. :wink: :lol:

Hi Simon, I don't know what material mine is made of, but the guy's from EB-UK recommended the "tap" on the cage and if I remember rightly they also suggested using compressed air occasionally, they did not mention using water. I am not sure if water under pressure would damage the cartridge...

Until now I too have just tapped the sides of the filter to clear it; it is quite surprising how much dust drops down in to the bag when you do this. After three bags full of sawdust it's time to do as waterhead37 does, and give it a good blast from the outside with an air-compressor as I have...

It took a while but here is a picture: The only thing you have to watch for is the height (1m87), kinda obvious I guess...

fantastic, I'll be trying this out shortly. Mike

I use a Festo VS500, with a Bosch POF800 ACE - in fact I am about to do another five drawers this morning. I bought the VS500 relatively cheaply, it was an ex demo and the VS600 had just been released. It's quick to use (just need's a little setting up) and cuts both sides of the joint at the...

Hi, I bought the cartridge filter for my SPA1100 localy in France, but don't worry you can get them in the UK for roughly £100. The EB Part number is : 091 300 5058 I was given a quote in the UK by Lawsons http://www.lawson-his.co.uk/ I'll post a picture a little later.

Hi Badger, About nine months ago I bought an EB SPA1100 for use with my bandsaw and P/T. The first few weeks were OK until I started coughing and found a thin layer of dust covered everything in the garage. After a little searching on the internet, I discovered the "filter sack" provided with...

Seaco, Welcome aboard. I have the Scheppach TS2500ci with a 2m sliding table a side extension and a mobile base. I wanted something that would give me decent cuts, cut the big stuff when required and could be packed away easily what I need to get the car in the Garage. As Martin wrote the...

Martin, And to stay in line with subject; if you do use a slot cutter, what do you do to protect yourself from the blades? DemiFrog

Martin, Did you you buy groove/slot cutter for your scheppach TS2500? If so, have you had a chance to use it; if you have, what do you think of it. DemiFrog

I hope the Garden leave goes the way you want it to, giving you plenty of time to get covered in wood chippings :) . So what's the first project "the other half" wants done?