Search results

I too started arc welding recently and of course I learnt from YouTube, one video I particularly remember is: How to die while arc welding at home: the top 5 ways | Auto Expert John Cadogan I went on the repair an ancient iron fence that had been crushed by a falling lime tree. I had a lot of...

Hi Rob, My first thought is do you have the correct belt on the table saw? The belt on my CK26 is so tight that I struggle to get it on the table saw. Perhaps try a swap with the other belts? I do notice that it is impossible to retract the saw to make a shallower cut than 5mm - perhaps a...

You were right about twisting the belt - I just didn't see the room to do it with the belt guard design. But now I see that's the answer.

Thank you Powertools. I've just followed your advice and it seems its problem solved. It certainly turns the right way by hand - I haven't run the motor and put timber through it yet as it's still a bit early on a bank holiday morning!

Thanks Lons, let’s see whether the Uk workshop community can help.

Hi Lons, Thank you for the wisdom you have already shared with me. I've run into a problem, which might have a simple answer that has so far eluded me. As I've assembled the 4 function CK26, the planer/thicknesser works fine and the spindle moulder looks ok too but I haven't put any timber...

Thank you for this its very useful. I've just printed it and can now read it. It helps me make sense of some of the brackets that came with my machine but without the attachments! Also all the technical specifications - including for belts. Do you know the date this was published?

Thank you for the tips. I had a look at the French sites, "Leboncoin.fr" was the best and there is a lever on there that may be useful if I can't weld-repair the one for my machine. Lathes.co.uk - wow - what a resource! But I found no mention of Kity - even though I know there were Kity branded...

I'll certainly check the French sites - good tip!

I have just acquired a Kity CK 26 with the 636 planer/thicknesser (260 width), 617 table saw and 628 Spindle moulder. I have the manual for the 636, but not for the CK26 combo or the 617 & 628 - does anyone have these manuals? As I set the machines up I'm starting to address some issues: I'm...

Replying to all you nostalgic printers - thanks for your contributions and stirring up memories of the old print trade! I've no knowledge of printing, so I took a look at the scale - which is hard to read - sorry no photo. It seems to be in sixths of an inch; the left hand end starts at 60, the...

Hi Ian, that sounds like a good shout. Any idea who the maker was?

Hi, I know you are all curious and knowledgeable people so can I ask for your help in identifying this old tool? It is basically an aluminium casting with steel bladed guillotine-type cutters and an in-feed (with calibrations) designed to produce exact 90 degree cuts. There is a mark in the...

I set out to make a mallet because my old one was a bit light in the head and I was looking for a project to make with hand tools only. I had a section of old oak sleeper sitting outside, but under cover, and I figured I could cut a chunk off the end for the head and use an oak off-cut from my...

I've been a hobby woodworker for the last 40+ years using a mix of hand tools and basic power tools. I made a lot of furniture (bed, bookcases, built -in wardrobes) in my 20s with very basic tools, when I bought a house that needed lots of work. I also repaired and restored some antique...

It was a good pilot and I hope it makes it to a second series. If it does I think the participants will be better prepared and the there will be a step change in the technical quality of the projects. It is always going to be a mix of design and execution skills and those that excel in both will...

His YouTube videos on boat building are inspirational, even dangerously inspirational - I’m very tempted to try it!

I think this is part of an old boot last, used in the shoe making industry. I found this picture on-line that shows how it was used. The giveaway for me were the neat numbers which I have seen before on shoe lasts.

I've watched the first 2 episodes. The first one was disappointing, the second saw a small step forwards so I'll probably keep going...I think it should really pick-up when the last few have to seriously compete. I also think it promotes woodworking to generations that have not had experience of...

The last thing that I've made is this gate in English oak. The final picture shows the ancient softwood gate that it replaced. The new gate is slightly higher and square at the top, which is intended to stop the local cats from jumping over it! I like cats, but over many years they have damaged...