Search results

The only noticeable heat will be from your power supply. As LEDs are directional beam, the alu tape won't serve any purpose.

No, 300/5m would be SMD 5050 chips, 600/5m will be SMD 3528 chips. Although you get less per meter, the 5050 chips are much higher output than 3528. They are actually better in both terms of lumens and efficiency.

How can we be short on power in the UK? As of this year we have a generation capacity in excess of 60GW, not including standby engines. In the last 12 months, demand hasn't exceeded 48GW.

I've got an 11 plate 350 LWB HR Transit, 86k miles with tow bar up for sale if you're interested? It' in Birmingham so not a million miles away.

:?: LED tubes are only connected at one end, the other end has dummy pins. Fluorescent tubes have filaments in each end to ignite the gas, hence the pins at both ends. The LED tubes have a live and neutral connection at one end of the tube only.

They are basically the same saw. However, the Rage is more trade oriented and has much better machining quality and tighter tolerances. For instance, I have both Fury and Rage CMS. The Fury suffers from loose pivot joints, has done from new, and the mitre lock isn't the best for accuracy. The...

Quite true, the phases are split once they leave the local sub. However, each phase has to be balanced as much as possible to avoid issues at the generation end. Sometimes, developers and engineers forget this when they design new builds :roll:

I use Flexovit on my Makita ROS, never had any issues. You can get them from Screwfix or Amazon.

I watched the first and thought it was dire. Things can only get better eh? Wrong! Absolute rubbish. They are trying too hard to emulate TG and it's an epic fail. The team chemistry remains but that's about it. The scripting is terrible and the jokes are, well, a joke. Too much time is devoted...

:?: The original 10.8v Makita were more powerful than the Bosch Blue in testing and the batteries lasted much longer. FWIW, I've had both and much prefer the Makita. Much better balance and battery life is near twice that of the Bosch. The grip is more comfortable too, the Bosch has a strange...

Best of luck. My advice though, don't bother with domestic electrics - there's just too much hassle and paperwork these days. I've completely ditched the domestic electrical work now, apart from the odd job for friends, and concentrate on commercial and industrial stuff instead. Money is so much...

I have two of them but the USA models (£63 each inc import duty). Lightweight, fast, battery life phenomenal. Only problem is I can't find any impact driver bits that cope for more than a week without snapping.

I have 3 DHP480s and none of them have any chuck wobble at all :?

Problem? Surely if you're investing professional money in cordless kit, you take the time to research the products to find out the specs? If people don't check the specs before they buy, it's hardly Makita's fault.

£4000 should get you something half decent. For instance, the place I bought my MK7 from recently had 10 plate MK7 LWB MR 140 Sport van, one owner, 90k, for £3795 +VAT. Part of me wishes I'd held on another couple of months to the Trafic as I could have gotten that van for around £3500 inc VAT...

Do you actually have a budget for the new van? FWIW, I've not long replaced my 54 plate LWB Trafic which I sold for £2400 as I'd outgrown it. It had 156k on the clock and FSH, recent gearbox rebuild and timing belt done. The only issue, apart from the box (which hit 151k before the bearings...

If you use the CLS end on and use 50mm Celotex, by the time it's boarded you should have plenty of depth for dry lining socket boxes. 50mm Celotex is roughly equivlaent to 150mm poystyrene or 225mm fibreglass. As a guide, I pay £14.50 +VAT for an 8'x4' sheet of 50mm Celotex from Magnet.

I assume you are talking a perimeter seal to the brickwork? I would seal with a clear low modulus silicone (try Eurocell, under £2 a tube) and run a line to seal it. Then bed in a hardwood fillet trim which can be painted or stained as often as you like. The silicone is completely hidden and it...

But if you've no mobile signal then it's unlikely you will get a data signal in any case, unless of course you can hack into an unsecured wifi network :-"

You can do that on Whatsapp and Facebook Messenger (hammer)