Search results

2 Bessey Uni Klamps good working condition UK60 600mm/2ft capacity. 80mm from top of bar to top of clamp body. Bought in 2023..not had a lot of use as I tend to use cheap aluminium sash cramps. Bars splines/teeth are in good condition so no slipping, clamp threads are also in good condition...

£8.50 posted (UK only)

Full information here https://benchdogs.co.uk/collections/metric-bench-dogs/products/bench-dogs-set-stainless-steel-1 Metric (fit 20mm holes) Stainless 2 x 40mm high 4 x 12mm high All are tapped for m8 bolts/thumbscrews. 12mm ones have through holes, 40mm are tapped from underneath only. UK...

Doing less and less woodworking at home and I've barely used this since I got it recently. Excellent condition supplied with all the original parts. I purchased the type 4 makpac after but didn't get read to purchasing the insert tray. I've included a set of various cutters for free as they are...

Purchased in December 2023. Working condition is excellent. Aesthetic condition is very good. Supplied with sustainer, Uk cable, hex key and 2 pad savers (1 unused, 1 light use) Warranty has 708 days remaining (5/12/26) and I can transfer warranty certificate to buyer. UK POST ONLY SOLD

I'm just doing some maintenance on my home 10" bandsaw. A couple of the bearings were seized so I've ordered 6 decent SKF bearings. In the meantime, I was wondering if anyone has managed to add additional dust collection to a 10" saw in the same way Steve Maskerry and Dr.Al have done to their...

Im just looking at a Fobco online. I think it's ex school and had a motor swap to 2 phase. Looking at the limited pics, the motor plays says it 1425rpm and 250w. We currently don't have a pillar drill at work and I don't have one at home so I have no comparison at the moment but 250w sounds a...

Found these recently whilst tidying, I sold my lathe a while ago so no use to me. TBC pen centre bushes from Taylors Mirfield. Not sure if they still sell them as they've sold out for ages. I've had these since 2020, have been used a lot but still in pretty good condition. One can sometimes get...

2 Axminster UJK 75mm Hold down clamps & short length (275mm) of UJK T Track. Very good condition. One of the mitre slot bolt attachments is missing (pictured with arrow) info here https://www.axminstertools.com/ujk-technology-hold-down-clamp-75mm-106119?queryID=2bf41632741111b6fd44db59ad199b9e...

As requested by Fleyh. Plane on the Ax website https://www.axminstertools.com/axminster-workshop-no-5-bedrock-jack-plane-110625?glCountry=GB&gad_source=1&gbraid=0AAAAAD-oZrMJ4WVEdSfUAqAGZY9EUSrST&gclid=EAIaIQobChMInvXEycbPiQMVSJdQBh1URTymEAQYASABEgLaHPD_BwE Quick overview/review. I recently...

Selling this for a mate. He hasn't had it that long, I think they were only released a few months ago. I've got it at my day job workshop and had a look over it. Condition looks excellent. Details here https://www.axminstertools.com/axminster-workshop-no-5-bedrock-jack-plane-110625 SOLD thanks

Finally got house move sorted so I'll be to get new workspace sorted soon. I'll be making a new router table but I'm unsure of the best way to mount my Makita router (2301). All my previous table mounted routers were Trends with pre drilled plates. I've got a 10mm alu undrilled plate ready to...

I've got a Makita RT070 and a Katsu, fixed base only for both. Decided to get a plunge base and thought I'd go for the Makita. Both routers look pretty much the same but thought I'd check if anyone knew if there is any compatibility issues with the Katsu and the Makita base. thanks

Trend T10 1/2" Router 240v Bought September 2023 and used about 10 times. Condition is very good. Supplied with all original parts: Fence, 30mm guide bush, spanner, centre bit and extraction attachments. Also included are a few things I purchased separately: 1/4" collet and 16mm guide bush. As...

Makita AF506 18 gauge nailer. Excellent condition Now on eBay Hyundai 8 litre ‘silent’ compressor. Again, excellent condition. A couple of changes, I added a regulator (to use an airbrush) and the cable has been made long (crudely..connector block and tape) Also included: 3 lengths of hose...

Festool FS HZ 160 lever clamp £25 posted (UKonly) sold to Triton Kreg KPHJ320 pocket hole jig & classic face cramp. All parts included apart from user manual (a pdf of that is on the kreg site) £35 posted (UK only) sold to lambcrafter

Camvac CGV 336-4 twin motor vac https://www.recordpower.co.uk/product/cgv3364-55l-2000w-medium-extractor-4-inlet Axminster 100mm cyclone...

Bought August 2023. Filters seems ok and its in great working condition. Remote control is included but I have the hangin chains or bolts ( I bolted it directly to 2 pieces of timber, which were screwed into the trusses) Collection only from Greater Manchester or I could travel a bit to meet. SOLD

Record Power SC4 chuck in good condition with: Key (I cut the ball end off) M33 insert and tool to remove 50mm jaws Faceplate There’s only 6 screws pictured as I’ve lost 2 but some I’ve got 8 sorby screws being delivered tomorrow so there will be 14 in total £90 Posted to UK (SOLD to Sru )...

I’ll be moving soon to a house with a much smaller garage so I’ve decided to try and sell my lathe and turning tools, etc. I’ve not done much for a while so I’ll hopefully not miss it. KS Midi FU 350 Lathe. Bought from Hope Woodturning in January 2021(I can give a digital copy of the receipt)...