Search results

Yes. at least the BT ones we have now and the panasonic ones previous to them do/did.

Some thin ply or similar. cut to desired top shape. duplicate. cut bigger than fist sized hole above bowl in one piece. Put in place over sink. put hand /arm through hole and run (roll) pencil around sink walls to get inner profile of bowl marked on underside of ply. cut around line. fix one...

Forget the box. get one of these or similar ... http://www.screwfix.com/p/manthorpe-gl2 ... oCnwTw_wcB fit some chains/stays/etc to halt hatch opening at correct tilt. :)

I understand that you are genuinely attempting to be helpful but ... you state your view, someone else states theirs and conversations and or disagreements follow, all of absolutely no use to the vendor, and the thread gets bloated with irrelevant information. You know the rules ... 3-...

The rules have not been changed. They are the same as they've been since at least the time I joined and the mods merely try and implement them. Sorry you feel aggrieved and take it personally but if anyone comes to your house they abide by your rules, same here. I am not a member but maybe here...

Search Ebay for Record Power Nova DVR XP and tick the ' show sold items' box. This should give you an indication of what they sell for.

So - can the google search by either fixed or removed? Having a broken one doesn't seem very helpful! BugBear No. Its not broken, its just less clear than the inbuilt one and has advertising links in. It is also 'maintained' by google.

Use the search on the right of the page in the user tools rather than the google search at the top of the page. results here... search.php?keywords=printing+from+Sketchup+&terms=all&author=&sc=1&sf=all&sk=t&sd=d&sr=posts&st=0&ch=300&t=0&submit=Search

searching what? where? and what with?

News to me :) The obvious is always welcome.

As can been seen above I have temporarily added some air. A couple of coolant pipes as suggested by Naz and a cheap pump (£7.62 inc post) from the internet. I was thinking of adding an LED to the end of one arm but the pump has two outlets so I used both for air. The result? It works. Just...

Another question: Will the blade eventually twist if I tend to keep cutting in the same direction? For example, cutting the snowflake test pattern I tended to do the same cut (direction) over and over, I did notice the blade started to cut to the right. Turned out to be the seating of the top...

Thread edited due to not very helpful bickering by the usual suspects. Please do not continue it. Apologies to those helpful well meaning posters that got caught in the edit. Scrimper you are at no fault whatsoever please continue :) EDIT. BTW in case its not clear in the above suggestions...

Thanks for the advice gents but the OP was in 2010 :)

Same as Peter above, pics 2 sd scanner This is the result from two random slides one from the late 70's and one from the late 90's. The aerial shot was from memory, Fuji film, 35mm Canon EOS ?

Yep, the pritt chapstick type ones. At 4 for 69p I wasn't expecting much but it was all they had without venturing another 10 miles. And back again.

Lesson 1* - Make sure your glue stick sticks! If yer pattern's flapping about you can't follow the line :roll: Lesson 2** - You need an air supply or you chance hyperventilating :) Anxious to see if my new Pegas blades were any different to the ones that were with the machine (I'm...

Inspected my 'ballbag' today and as expected it has expired due to age and non use :( Next stop is the aquarium shop up the road for a pump et al. Ordered a handful of Pegas blades from Axminster so I can eliminate blade quality from my list of things to blame when I can't follow a line. So...

No puffing so I will investigate in the morning.