Search results

Bump

No absolutely not 😁

So after praising the 9404 I went to use it today. Powered it on - nothing. Took it into the shop and tried it again and it worked. Took it back to the job - nothing. Wiggled the mains wire and it worked so removed the power cover and found the cable clamp was so tight it had worked through the...

Or buy air dried? If you buy kiln dried you will need to stick it until it stabilises with outside temperatures. You can sometimes find air dried on facebook market place or if you want either in oak look here.... Planed All Round European Oak Timber (britishhardwoods.co.uk)

Still waiting for my text. I can book it if its 6 months and one week from my 2nd jab which ends on Friday

Tried the a 120 grit today and it cleaned up some birch ply a treat, faster than ordinary discs and nice and smooth. However there was some damage to the outer edge so which interface pads are recommended? I've noted @TheTiddles recommendation to not use them if sharp edges are needed.

hey not often you get a freebie....

You won't be disappointed with the 9404 I've had mine for 15 years and used it on various projects. It's still going strong.

This free trial mxed set of 8 x 3M Xtract 150mm discs arrived today from BND. Looking forward to trying them

Yes it is, I tested it with the radio disassembled but connected (y)

Welcome Rob Start a new thread to show us your progress with the bench (y)

That's a canny idea Phil as our woodburner often throws out too much heat for our lounge, even on tick over, and it soon gets uncomfortably warm so I'm now thinking how I can extract some heat into adjoining cooler rooms.

Our village are donating a hardwood bench in memory of a recently deceased, valued member of our community. I don't yet have the kit or enough experience to make a good fist of this so I'm looking for a member you can make a great bench or point me to a recommended maker. I have found websites...

Now you're talking, they go together a treat!

+1 for cufflink

You could do as I did and post a request on the metalwork forum to see if a member can turn one for you. I simply measured the motor shaft and gave the size of the sander plate and one skilled chap made me this: This is the finished sander and I'm delighted with it:

I bought an excellent Dewalt DAB radio that runs on 18v Li-on batteries and is very useful when working outside but it does tie up a battery which lasts 2 days then needs a recharge so then I'm two batteries down. So I thought I would get hold of a duff 1.5AHr battery and convert it to mains for...

Price?

You can obtain a straight reference edge by making one of these Simple Taper Jig // Jointer Jig // Woodworking // Diy Jig - YouTube and she shows you how to use it to create a reference edge in this video $40 Moxon Vise - Easy to build in an afternoon! - YouTube

Yes I agree Phil but if I do replace it I will sell the old one. It all depends on the cost of a suitable GSHP. The only issue I have with the pellet boiler is uncertainty on future pellet cost. It cost us £225 pm in 2015 and now it's £300 pm so pretty extortionate albeit only in winter months...