Search results

If you can straighten the bar, and get some weld in the missing area, and grind /file it all smooth so it does not mark the timber and use it again. If the welder man could clamp the repair area in a vice and let it cool, may help any distortion and possible twist. HTH Regards Rodders

22 rimfire and a 22 air rifle for pests, rats rabbits etc Rodders

'Er indoors bought me a box like that a while ago, it had a map and compass inside! Rodders

It sounds like you have damaged the pressure bar, As you say there's no pics or help in the manual I found. If you know someone in engineering it could be possible to have an exact copy pressure bar made, in size length, width and thickness. Should you take this route take plenty of pics and...

If you have a place near you that sell "Fastenings" nuts bolts screws etc would be a good place to start for rollpins, or a garage mototfactors, selling garage consumables. HTH Regards Rodders

This is a site saw, just used for general ripping and suchlike, It's not designed for precision work etc. I've had a couple, very useful. The only suggestion i have is to check out the edge of the top, and see if you can fix a "U" chanel for the mitre slider and align this edge with the saw...

As you say, a most unlikely part to find, hopefully someone will be able to help. Is you'rs broken or worn and possible to repair? Someone put me onto this French firm (below) for Kity K5 belts and they had some obsolete bits, maybe worth a try. HTH Regards Rodders...

Sorry,Yes, missed out the free bit, and was hoping to keep the bacon rolls quiet, We're taking several different coats so we can keep queuing and get more free bacon rolls! Rodders

The Micro switch just puts the ignition current to earth, just disconnect each one 'til you have a spark, then replace it. The deck drive, brake and under seat are the frequent culprits, Perhaps this diagram would be easier to read. Rodders http://www.mtmc.co.uk/Atco-TRACTOR-12/3 ... 82217.aspx

The Lister D is fitted to the earlier Start o matic generator we had so many of here in Sunny Devon, We worked on mine many years ago when the Electric company wanted £14,000, for the mains "hook up" total cost for the re built generator and "D" engine was around £700, and £150. to buy, Diesel...

Yep! I'll be going more than likely, it's on for 2 days, link below,-- My mate has complimentary tickets for Thursday, 21st I believe. http://toolfair.info/ Rodders

From working with a friend that mends and sells Mowers, strimmers and chainsaws, If the gudgeon pin was "fully floating", moving in the piston too, it would just push in, but most are a snug and interference fit in the piston, so either gudgeon pin in the freezer for a few hours and fitted to a...

I Googled South Wales Saw Doctor and got this,below, there are others http://shop.hamiltonbeverstock.com/ HTH Regards Rodders

Evaporust, safe rust removal, allegedly, for sale on fleabay and others. I wondered if it was as good as the electrical methods? Rodders https://www.youtube.com/watch?v=u03UtReREm0

As phil.p and others have said, the heat just isn't there when you need it, with Storage heaters, I took ours out for the very reason, Rather a shame as the heat is clean and easy, in use and maintenance. For most of us, Oil or solid fuel are more readily available and easier to use. Gas isn't...

+1 As above, Rodders

PLANS, I'm liking this one so far, keeping the back doors access, but move the shower room to the far end, as it's tall. Thanks for the Haynes book tip williams 1185, I'll look into that further. Thanks graham orm He was a nice man with many stories to tell, He'll be sorely missed. Many...

Lons and Wuffles, I didn't say it was a final wearing finish, Just emphasizing That it IS a floor leveler, and it DOES LEVEL FLOORS, And to Just follow the directions on the bag. As you say It most certainly isn't a wearing finish, It's for use under vinyls or carpet etc, and not good for...

I can recommend blue max tyres, I had a set about 3 years ago and they're very good, They'll last a bit longer than cork! Regards Rodders

Thanks for showing this, Peter. Just signed this at 92948, do they ever bloody listen? probably be replaced with lessons in camel riding! Rodders