Search results

Have you a A axis to hold the rod of wood parallel to the bed and mill the thread?

I cut non ferrous on my Inca all the time... alloy up to 50 thick

In think you need to make a few more posts or look on eBay for one

Yes sure i can pm me the threads you want to adapt from to

You won’t be able to control the speed of the motor fitted with anything... you need a new motor (3 phase )and a vfd

So do you want any of them or have I wasted my time taking time to photograph them and post the pictures?

turnbuckle £50 chuck adapter £ 60 Tailstock complete £350

Doug i have all of these available

Doug. Your lathe pedestal must be an older type the newer ones had a pad (inverted “T”)which would take a long bed or a shortbed type

Bull centre for a lathe holds pipe centarlly between centres it would fit onto a revolving centre in the tailstock

Standing at the front of the lathe remove grub screws completely from the collar on the left hand end of the spindle there may be 2 in sometimes (imperial sizes only ) remove grub screws completely from the pulley place a piece of wood between the rhs end of pulley and rhs bearing housing. if...

I tried one of these at a company i go to... TEC 810 15mm Industrial Glue Gun | Glue Guns Direct - Glue Guns & Glue Sticks UK And immediately bought one it warms up quick and can put out a lot of glue quickly. The price stings but its a great gun

I think i would first get a friend to ring with a similar problem and ask on their timescales to do the work...if they say they solid until sept then you stuffed However if they can come and look and do the job in a couple of weeks then you can take it further

Many thanks for this arrived safely and next day too!!

Can i have this please?

Well why don’t you get a drive centre to hold in your chuck? You may lose a little between centres though Ian Sorry just seen Marcos suggested that

Crikey thats a short thread many thanks phil

Phil These dimensions

Thanks Phill Whats the register dia? And length? And length of thread?