Search results

Is there enough of them left to see a number/code on the old belts? Something like z 300 ? They are z section belts 2 of them IIRC

The lathes thread is 1.5” 6 tpi on your graduate

A friend of mine has an ESAB rebel which is great except for the price.. I have a mig machine and a tig ac/dc for much less than 1/2 the price of a rebel Esab machines are sold at the welding supplies on newhall road Ian

That’s a screw chuck as well as a faceplate

If you could find a gearbox to do what you want it would be treble what a VFD would cost

In future put the Allen key against the bed and use the spanner to undo the chuck pulling the spanner towards you when stood at the front of the lathe Also a washer cut out of a milk container works well to stop the pair locking up so tight Ian

That’s a Harrison L1A lathe for information

another thing to consider ...the noise from that type of compressor will wear you out in short order..you will be always wondering when its going to start up and be thankfull when it stops Ian

This is what i have made

Yes i can do that for you Thanks marcros

Have you looked at the non return valve as i suggested? from the start the tank is empty... the motor starts and is filling the tank... it pushes the air into the tank via a non return valve... when the pressure switch senses 10 bar ( 150psi) the pressure switch opens and stops the motor... in...

Its the nonreturn valve leaking….where the small pipe goes to on the tank is a rubber washer with a spring pushing it down onto a seat…it leaking and letting the tank air go through the pressure switch…empty the tank and take this alve apart…its easy to see what’s wrong

I went down to my local store and they had lots in stock so didn’t feel too bad at taking 10 of them

Try and borrow a flir camera or a infra red camera that will pinpoint your leak whilst the heating is on

]Here’s your adapter cats mother

Union graduates only have as standard 3/4 hp and thats plenty for spindles and bowls up to 8”

I have sent you a email catsmother

Yes i can send me a pm with your email or number

well you could remove the gouge and try it?

Mine is mounted on a Bosch grinder with no ill effects…what’s your meterck grinder like without the gouge mounted?