Search results

Emailed Richard Potter for a price, bit of a trek but hopefully they can sort it.

I need to find someone with a spindle moulder really. Have been looking for the right moulding for a new railing for our stairs and can’t find what I want, but randomly came across this website https://www.wooduchoose.com/ You choose from a zillion different silhouettes of mouldings - I chose...

I saw that too...but this one is more satisfying (IMO)

@custard if I were to invest in a dovetail saw (nothing too expensive) is there anything you would recommend? The birthday fairy is asking me what I would like... Probably about a £50 limit

Someone got in there quick...

Sizes. The small ones are 850 x 550 x 1700h The big one (currently dismantled) will have a footprint of 1450 x 760 and will be 3385mm height once assembled. Filters were last changed 2014, but don’t appear to be in bad condition. Some water has collected in the collection bin for the large...

Hi Deema, I’m afraid the air-flow isn’t shown anywhere and I don’t have the commissioning data. Small ones: Big one: The small ones have a manual shake rod and the large one has an auto-shake motor. Again, untested as no start gear, I think these are pretty bomb proof but no...

Do you have a website?

Better add some pics....

Hi folks, I have x 3 large P&J extraction units no longer required. The two smaller ones were each connected to bandsaw and the large one was connected to a panel saw. They all have 3ph motors but look like dual voltage. No start gear on them. £200 each for the small ones, £350 for the big...

Hot glue (or superglue, followed by some of the un-doer stuff later) the thing to something with a flat base.

Just accept it will never be finished? Mine is a right state, arguably worse than when I started improving it, but life goes on and it will get there in the end. In hindsight it’s probably unwise to replace the roof and insulate the walls with everything still in the garage.

Roger at Specialised Panel Products

I thought it was going to be easy after all until about 20 mins in. Backing out of those cuts...:oops: The superglue is interesting too.

What model? Can you post a pic? If it’s a BAOS I might be able to help

I’ve been working on the woodwork around the house, and after stripping off the paint there is a pink-ish tinge to the timber. I’m curious whether it’s a treatment similar to modern pressure treated green / blue stuff? Or is it the primer used? It’s a shame to paint over some of it again...

The top step was beyond saving, so I made a new tread - a few mm thicker than the old one to (combined with new ply subfloor which is a few mm thinner than the old floorboards upstairs) give me the transition needed for the carpet. The problem is the new pine seems very soft and dents...

They do in my branch, it’s actually not bad quality.

I figured it’s the same as the ‘artisan made’ fine furniture found on FB marketplace from scaffold planks. Someone sells a decent anvil for a fair price and then anyone who digs one up from then end of their garden has licence to sell it for the same. Price of a good one goes up, resulting in a...

The Hafele ones are ok, last time I checked.