Search results

I’ll take it of available Bob?

There are student editions, here’s the one for NX. https://blogs.sw.siemens.com/nx-design/nx-student-edition-free-download/ I believe there are Cura plugins that will talk directly to NX, haven’t tried it with the student version though. STL’s from the full commercial work great.

As you've found, Thingiverse and Instructables www.instructables.com .

Oisin, I’m in a similar position with the scheppach, did you manage to source the extractor hood?

Project drift I know, but a nice starter project, how about a home made Dobsonian? https://www.skyatnightmagazine.com/advice/how-to-build-a-dobsonian-mount/ Binos are great, but once you’re hooked....

Binos to start, versatile for other stuff too. First light Optics have a good range and great forum. I used this site for reviews and went with the Opticrons 10x50. Light, good eye relief and easy to use and very reasonably priced. Trying to convince myself to upgrade but would likely need to...

We are off street, down a private drive on a cul de sac, with a plot of land to the front perfect to build a garage extension for a workshop on the side of our existing double garage at the front of the house. We were told, no chance, submitted a request and knocked back as classed as front of...

I’ve been using these and printed dogs - All from thingiverse - Festool MFT DIY Clamping System by J-Max - fine for lightweight stuff.

Hello all, thanks for responses. MDF on ply, reading posts seems better to sit router plate into MDF and I only have a small sheet of Mdf available. Looks like both sides then, I’ve a couple of sheets of Formica I plan to use with pva. I’ll be edging it with hardwood so I’ve something...

Hello all, building new router table and will be using 15mm Mdf as top bonded to an 18 mm plywood sheet (900x600), with Aly router plate and Triton tra001. I‘m laminating the top surface, but will I need to laminate the bottom of the ply sheet to stop bowing? Thanks all.

You should try the newer ones, I much prefer them. Odyssey was great fun to play, just starting Valhalla, enjoying the visuals so far.

As others, started Atari, colecovsion, intellivion, etc etc. Went down PC route, found not comparable with family life. So been console user since forever. Xbox fan but always bought comparable sony console for a few exclusives. Have Xbox series X in projector room, nothing much to play on it...

Nice square by the way....

I have a Henry running through a cyclone for lathe and saw and then one of these. I just set the timer and leave it running. Think I paid about £130 before Christmas. https://www.yandles.co.uk/record-power-ac400-two-stage-air-filter-with-remote-3-speeds-and-time-delay/p5004

Sheffield in the 70’s and 80’s was no fun - Every generation seems to have a pivotal struggle. Our children now are more open, enabled and told they can do anything. Reality is a kicker. And go watch when the wind blows, classroom lessons on hiding under the desk to avoid nuclear annihilation...

Ok for me.

Here you go.

Hi All, is there a name for the metal spigot/bus guide and 'cup' on the attached picture? It's for a wool bobbin type thing. Could use a bearing and ground down screw thread, but this looks neater. Thank you h

If you’re doing Knots, then what about AU’s?

What’s this ‘metal’ thing you speak of?