Search results

hi I am selling my record power bs300e band saw as it has hardly been used for the past two years, it is approximately three and half years old,eighteen months left on warranty, which record power will not pass on to the new owner, there are three blades to go with it a 1/8 th new // 1/4 new...

saw going back to axminster next week would not send me spare parts to repair it my self. take care john

hi again here's hoping you and your family's are all well, Having recently fitted a new set of blade clamps to my ex 30 , all went well for a while,and now the saw just wants to vibrate its self to pieces, I have checked all the holding down bolts and screws all tight, checked all the bolts...

hi finally got sorted and ones has to set these clamps up ones self for £91 i would have least expected a 5 mm allen key and the clamps set up, now it could be an age before one gets it right , but I think I have a cunning plan, use a set of feelers and set the new ones up to the same as the old...

hi Andy just sent the second replacement blades clamps back to Axminster, first set the tightening screw the thread was kaputski , the second set I could not get a blade into it , the anvil screw was too far through, I have asked them before they send the next set out to please check that...

hi clamp kit came last Thursday, fitted it and the blade tightening screw had thread problems so had to go back , awaiting arrival of replacement , maybe tomorrow hopefully. take care John

today I got in touch with Axminster tools on the phone, as it takes a long time for them to answer emails, and asked them if the blade clamps where covered under warranty as £91 is a lot of money ,and surprise surprise, they are, and a set is winging on its way to me as I type this, it was worth...

hi tonight my tension arm has stopped working any help would be gratefully received, could it be the spring gone?? the screws to tighten the blade have just about given up the ghost. and not possible to get spares, tried bearwoods in Canada, as they seem to be the only ones who keep bits an...

I thought there would be no difference between fd and Niqua but there is John

thanks for that droogs i was going to look up who made them, I wonder if anyone has asked them for a dealership to sell their blades in this country?? take care John

tried them al olsen pegas niqua judy gale roberts titanium and all the other non named brands ans only fd seem to work best for me take care John

I also looking for a Flying Dutchman supplier in the UK, I recently tried some Niqua supposed to be as good as fd but I did not find that so, too aggressive in small cuts,I have tried other brads but nothing comes close to fd, I wonder why someone does not approach the factory and get a dealer...

thank you

magic forgive the pun back t normal take care John

have you thought about getting a head set magnifier , mine works really well and the clip on magnifier specs work magic, might help your neck a lot. take care John

belatd happy new year and I wish you loads of luck getting rid of the corset / take care John

This is a pattern by a man from Australia called Bothas helder, it is designed for plywood , but I cut it out of 15 mm pine board, it takes about 9 hours to cut, take care John

hi Andy nice to hear from you I went the other way and bought clip on magnifying glasses and a head set as well both came to about £12 and do the job, and I already have a light that sticks on the arm - magnetic - the one Brian suggested and works really well. not totally on topic if anyone...

when you are working , you have to keep moving it out of the way when changing holes and changing blades, then replace it , imagine doing that between 150 and 1000 times on each piece you work on ,it is bad enough resetting the blower each time and a light as well, would drive you crazy, hope...

hi again I decided not to get a mag light, as I figured it would more of s hindrance than a help, take care John