Search results

I found their site today, they do a 1.8mm 12T blade, I have emailed them

Yes, I agree the 12T alternative blade doesn't seem to be an option.

Hi. Any suggestions for replacement track saw blades for the Festool TS 160 x 2.2 x 20mm I need a 48TPI and a rip blade, I thought Scott+Sargeant did them but apparently not

Will be at Harrogate next weekend, intend to have a closer look at the portable Festool Table saw and a 125 mm Festool Sander. I am thinking of getting a battery sander if the batteries between the sander and saw are interchangeable. Are there any Festool show offers that you know about...

It's not uncommon, if your edge isn't square to start with the plane will just follows what is sees. This is my approach to getting a perfectly square edge.

Update – we could not release the old tectite so had to cut the pipe so went with new soldered joints

I am in the middle of a bathroom refurbishment. The CH supply pipework is tectite copper pushfit, probably 25 years old or more. I feel I need to replace them as once the tiled floor is done there is no access Options are replace with plastic pushfit pre soldered joints standard soldered...

It's, solid wall with the old tiles, rather than hack it off which would probably bring off the sand and cement we may plaster board over it and skim it.

You should empty it after use, tune water off and trigger until all the water has gone is correct; however, I think Karcher sell by name and quality isn't that good. Coincidently, I went to the tip this week and one of the operatives was trying to get what looked like a very new Karcher working...

Hi What is he best approach for tiling to a new shower tray Tile to floor and place shower tray against tiles Fit shower tray and tile to it Opinion is divided with my tradesmen J

I am contemplating the Festool Portable Table Saw. I have bought from various retailers in the past and I appreciate prices between retailers vary very little Who is your go-to retailer for Festool ? Regards J

yes, thats the one.

Does anyone know how old the TS2000 Scheppach Table Saw's are I bought mine second-hand, and at a guess it could have been 2010 or possibly earlier. I get the feeing it's past its best and time to move it on, probably list it spares to be honest. Just wanted to give buyers an accurate...

Axminster has a marketing problem, the problem being they don't have one. They put products on their website and fill their stores full of goodies and expect people to turn up or buy online. That won't work in what is a very competitive marketplace, they need loyalty memberships, 2 for 1...

I have found Rob Cosman on YouTube some of the best learning resources for sharpening and setting up hand planes

No, all look fine

I picked up a Record 151 spokeshave at the weekend, I think it's an R version, but it isn't stamped R The adjustment threads look a bit skewed to me compared against a standard Stanly 151, see picture Threads a little loose in the body, but I'll fix that with some loctite. Any thoughts on...

It depends on how long and deep your boards are, I would try to reverse the process by using a router on a track or if the boards are smallish and thin I would use a shooting board.

I belive i need https:/ yes, I found them and have emailed thanks

Thanks, what is the name of the supplier ?