Search results

Hi Nathan It will be for one machine which is 2 HP and would like to keep the price under £300 if possible. Cheers Ian

Anyone recommend a converter for running 3 phase on single phase? Cheers Ian

Hi All I am thinking of buying the above sander and was hoping someone on the forum had one so I could clear up a few queries. First how true does the plate run? It says self adhesive discs are used but how easy are they to change? for instance is there trouble removed adhesive from the main...

The best and cleanest sycamore I have found is from John Boddy ask for Trevor. They are extremely good to deal with and have ripple as well as plain. My order was mail order and they picked out master grade quality ( you will pay extra for the very best) I have used some already and it is the...

Welcome Alan - perhaps your first purchase should be a good book on working with handtools - it won't break the bank! Ian

Cheers Peter have a Merry Christmas.

Thanks. Merry Christmas!

No they are no tapered.

Each leaf is 8.00mm wide and 2.80mm thick. Length from pin centre is 40mm.

Hi all Announcing our new design Neat hinge - now with a fully round knuckle making it quicker to fit!! Features 1. Full round knuckle (no flat or sunken areas) 2. Unique stop system 3. Competitively priced at £27 per pair (inc delivery) We hold good stock levels and provide excellent...

I have the incra router lift which has a 3/8" plate, when I received it unpacked and installed it was badly bowed. Contacted them and it was a bit are you sure what straight edge are you using and all this crap. Well they were going to look into it but after a day or so it straightened up quite...

Your are using quite a wide blade mine is 0nly 1/2" - works for me but I don't resaw as much as you - heavy use once a week.

TCT for all my resawing and standard ones for basic work. I use a Lenox tri master 3 tpi and it cost around £95 and has lasted about 2 years so far, I use it for resawing maple and walnut but I think the lifespan is increased by not reducing the tension after every use which will weaken the...

Hi John Drill out with a 6mm drill bit (not a wood drill) and then plug with a 6mm dowel. Ian

Welcome Paul - love the kiddies seats! Cheers Ian

Great work Mark - very crisp and clean, also thanks for the kind words on my Neat hinge but I have to mention that it has had its stop system re-designed and no longer needs the small undercut - all will be revealed in the next few weeks when I launch it. Keep an eye on my news page cheers Ian

I second borden UL39 from Hallmark. Ian

This guy is a nightmare - if it were me I would take this route https://www.moneyclaim.gov.uk/web/mcol/welcome cost about £25 and works very well. Best Ian

I always use the bandsaw providing the box is not any deeper than 300mm. It is one of the safest and quickest methods. I use a carbide tipped blade and it lasts a very long time otherwise a fastcut from tuffsaws does the trick. Ian

Mark I have never heard of the above method and would not recommend it for quality work. Best glue for veneering is Borden UL39 which has a low moisture content and has very little creep once cured, it can also be tinted with dry pigments to match the veneer...