Search results

But not if she has a pacemaker.

If you have a chuck you could turn a disc with a spigot and screw that on to the back of your MDF disc.

Does anybody use a centre bit when drilling wood on the lathe? If so what are the benefits? I was watching a YouTube clip and the demonstrator used a centre bit before drilling the full size hole in his project. I had never heard of a centre bit and from my subsequent and limited investigations...

Axminster 3-in-1 jaw set for sale £70 plus £5postage. See details in For Sale forum

Sold Axminster O'Donnell Dovetail Jaws comprising 50mm jaws, 38mm insert and 25mm insert jaws. £70 plus £5 postage using EVRI. Or collect from SM7 1HF (Banstead nr. Epsom, Surrey) axminstertools.com/100mm-o-donnell-jaw-sets-718321

Yes, the Tormek is the Rolls Royce at RR prices. I have had 18 years good use from the Jet, adding Tormek jigs (for touching up woodturning tools) to the jigs that came with the grinder. From experience I would recommend replacing the nut that holds the grind wheel with a stainless steel nut...

Thanks to all who replied ChaiLatte: It didn't occur to me to give a link to the manual, however your link to Toolsparesonline was most helpful. The drive wheel appears to be identical but on looking at the exploded view of the Triton they list the drive wheel and an O Ring (rubber tyre)...

I have had a Jet wet stone grinder (Tormek look alike) for nearly 20 years and the rubber tyre on the friction drive wheel has parted. The tyre is not listed separately on the parts list so it looks as if a complete drive wheel is required as a replacement. The machine is no longer produced but...

Classic Forms by Stuart E Dyas is likely to provide plenty of ideas from columns, pedestals to candlesticks.

I rode four PBP's between 1991 and 2003, all on the same Roberts bike, alas I no longer have it.

Sorry Dave, only just noticed your question. No it was sold soon after I listed it.

Now sold.

Record Power Bandsaw Upgrade. A.L.T. Saws and Spares replacement Upper Roller Guides suitable for Record Power BS300 and BS350 bandsaws. Fitting is easy, simply remove the old guide complete and fit the new guides to the original guide spigot, locking off with the set screw. I purchased these...

No, not directed at you MikeK. I will list it in the For Sale forum but I thought the people reading this thread would probably be those looking for an upgrade to a RP300/350.

I have a set of the ALT upper guides for sale. £55 plus postage. PM me for details.

I have used the same model of Microclene for many years, suspended over my lathe. It is efficient at removing airborne dust providing the size of your workshop matches the model of the extractor. I found filter replacement expensive but a cheaper alternative was to buy sheets of filter medium...

Cheam Woodturners Association are just down the road. Club room is at North Cheam.

My 18 year old Record BS300 has table size of 400 x 500 (measuring the cast iron). RP changed the spec quite a lot in the years after my purchase. My BS300 has cast alloy wheels, they then changed to cast iron, the fence was upgraded and eventually the quick release blade tension was discontinued.

And yet there are many paths with signs that show that it is a shared path by pedestrians and cyclists.

Ding your bell as much as you like Jacob, many walkers won't hear it as their ears are stuffed with earphones while we try to avoid their dogs.