Search results

@custard sounds like a good plan. Looks like I'll have to buy a bearing bit then:) Thanks! @sunnybob the laser will leave burn marks on the wood.

I have router but not a router table. Ideally I'd like to make a router jig out of perspex. I have access to a decent laser so can cut with great accuracy. I could cut the whole piece at once. The problem I have is the size of the radius on the jig to get 3mm radius on the piece.Using a 20mm...

I'm making several lids for boxes so really need some sort of jig. Needs to be exactly the same everytime.

Hi, Any tips on the best way to round off corners on small pieces of wood? Size is approx 75X40X3mm. Need a 3mm radius.

I'm working with blocks of bamboo as mentioned above. I have attached a picture but think you have to look in a computer to view it? They will be around 250mm2 to start with. The plan is to cut to size then place in a vice with a router jig on top to hollow out. I guess i could do all the...

Thanks yeah aware of bandsaw boxes but really want to make them out of one piece without any glued pieces.

I'm making some vaping mods. I made one for myself and got a lot of interest so making a run of them. Yes they need to be spot on. Making them out of blocks of bamboo. Have some router jigs made to hollow them out. Also have a drill press for the holes. Might just make a thread in the projects...

Thanks Roughcut will give that a go. Matt does a bandsaw have any advantage over a table saw?

Doh! Good idea. Will give it try

Hi Phil thanks for the reply. Yes it will be a large amount. Thanks for the tip though.

Hi, First post on here. I'm trying to cut small blocks with a mitre saw but I'm a little stuck. I'm using a toggle clamp to hold the work piece in place but the actual clamp is getting in the way of me cutting full depth. Any tips on a better way to do this? Was thinking of buying a table saw...