Search results

Hi sawdust, I have an after market banjo you might be interested in. I have altered a couple of parts which improves usage. I machined out the 3/4" bore and let in a split bush which accepts the normal R/P shafts... see pic. (this prevents damage to the shaft when locking) Also I have fitted a...

Thanks all...Rob, the large double pulley prevents the worn belt being removed... But will double check in the morning.

The school bandsaw belt has worn away down past the teeth and is now struggling to drive the bottom wheel. It looks like the wheel will have to come off to replace the belt. A circlip needs to be removed first and am wondering if the wheel will be easy to remove (and then replace) ie. should it...

...thinking about the Kapex 120

Does anyone know the official rrp for the Kapex 120...there seems to be big differences depending on where you look, any advice on the best price and where from? Thanks Gerry

...is it a diy job, or one for the garage?

Rac called and fixed the fault....here's the report. boost control valve pipe worn through on radiator fan and holed due to valve not fitted on mounting cut and refit pipe and secure valve but will need new pipe and refitting back in correct place dtc code p0299 turbo under boost.code cleared...

...had to turn back home when the above Fault warning light and STOP light came on. ..would the RAC/Green Flag /AA respond if I asked for assistance? Clio tom tom 2012 diesel estate. Gerry

....thinking about one of these...too far to travel to showroom, any advice most welcome! Regards Gerry

Just got the above for spare room...loaded and installed ok...can't access normal channels..Beeb, ITV etc. Do I need to register with Amazon for these? Thanks for any advice. Gerry

Will the QRC above fit the M1...where is it available? Thanks Gerry

Has anyone bought one of these...usually advertised in the sunday supplements.. I have a lot of vinyl I'd like to transfer to cd, usb etc.. Comments welcome. Gerry

Hi woodpig...my bs300 has the ali extrusion rail and fence (not the solid steel bar)...apart from having to 'hook' the tail end over the rear rail after each removal, there is no definite click when locking the cam lever...annoying! Gerry

Has anyone made a decent bandsaw fence.....I would like to replace the annoying aluminium one on my BS300!! Thanks for any help Gerry

Thanks for all that guys...could anyone give the respective model id's for the pin type and paddle type!! Thanks Gerry

Paddles or pins? I know paddles are the latest... ...if given a choice, which?

Anyone know of the best deal at the moment...found one for £475 on auction..not sure if it ok? Thanks Gerry

....3mm

Can anyone recommend quality jigsaw blades for cutting sheet steel? Thanks for any advice. Gerry

as above... ..thanks for any help! Gerry