Search results

It was an April Fools joke. They do one every year. I think the give away was when they mentioned the skid plate marking as a Skid Mark. Who unless it was April Fools would call it a SKID MARK ! They even said pay attention to the launch date of 1st April.

Obviously my system is different. I apologise for any confusion.

Yes, but you isolate the vessel first from the hot tank. It should have an isolation valve before the vessel. Then as you put air in the vessel the excess water comes out of the opened hot water tap. This is of course if the expansion vessel is indeed on the hot water side. The reason for the...

You can get anti vibration gloves. This might help your hands while you decide on a new sander. The gloves are a lot cheaper than a new sander😀

Is the expansion vessel on the hot water system. Because if it is you need to open a hot water tap to relieve the pressure to put air into the vessel. That’s what I had to do on my system. I isolated the vessel by way of a valve from the hot water tank, then opened a hot water tap. Then as I...

Thanks Duncan very useful. Mike worth a thought.

Thanks for the info. By the way Edwards pumps are still alive and kicking in Eastbourne.

Hi all. I want to use a vacuum chuck on my lathe. Does anyone have a recommendation for a vacuum pump. I’ve seen vacuum generators that use compressed air. But was wondering about how a vacuum pump compared. All thoughts gratefully received.

Plus 1 for Wera. I’ve had and used mine for years and they are still in very good condition. As Sideways says the handle ergonomics are very comfortable and transmit all the torque from your hand to the blade.

I started organising tools and supplies into boxes and the Tstak system when I stared renovating houses. This was because I was spending a considerable amount of time looking for tools. I also had duplicate tools, of which only one or two were my preferred ones. The others just got in the way...

Amazing work

+1 for shadow foam. I’ve used it on 3 boxes now. Easy to cut. The waste foam peels out easily after you give it a little nick to start it off. Looks very impressive once done.

I went through all the thought processes as you when I was planning a retaining wall in my back garden. I was desperately trying not to build a proper wall. I looked a gabion cages, interlocking blocks, all sorts of stuff. In the end I built a proper concrete block wall. It’s was a lot easier...

i‘ve been using these. They keep my hands warm, have extra grip due to the rubber coating. They are thin enough to feel what you’re doing. The big advantage is that the fingers will detach if they get caught in machinery. So I feel they’re ok for lathe work. I’ve not tested the theory though...

Hi try this for a variable speed conversion http://www.haydockconverters.co.uk/lathe_conversion_kits.htm

A friend on mine has been in dispute with British Gas for a year. His meter went wrong and It recorded usage multiplied by a factor of 4. To cut a very long story short, it took 2 referrals to the ombudsman just to get an engineer to check the meter, which promptly died when disconnected, then...

Hi Adam. What other Hope items are you thinking of selling. Do you have a Hope negative rake box scraper?

I’ve got this one Milwaukee M12BDDXKIT-202C 12v 2x2Ah Removable Chuck Drill Driver its a Milwaukee 12v with multi heads and has the traditional forward reverse button above the trigger. Cracking little drill driver. Had it for years still going strong. I think for £170 good value. It comes with...

Nice one. I made a similar bench a few years back. It’s invaluable. You’ll get a lot of use from it.

Yep lovely work. I commend your patience 😁