Search results

I was thinking a 12v driver of some sort would be suitable

So it is, it definitely wouldn’t work lol I’ve updated it now

Great job robgul I just can’t get a glue to work for me so need to try that one. My system is similar and works a treat haven’t really felt a drop in pressure makes clearing up a breeze

You could fit a diamond blade to a circular saw like this

Hi I’m trying to remotely actuate my extractor it’s a 110v dewalt dwv901 as my previous post-https://www.ukworkshop.co.uk/threads/power-take-off-via-remote.128104/ I’m trying a different approach now and need someone in the know to see if my schematic will work. Delay switch-...

What glue/adhesive did you use for polypropylene. I was gonna make it using 2 90 fitting and a tee it was too tall to fit behind the aluminium profile.

I used to use it with a dewalt 12” mitre saw but was so heavy to lug up and down stairs and I wanted to make support wings for it but it wouldn’t work the base so went for different stand. It was going to put up on Gumtree but I had an idea and this was the result

If I need more what size did you order? Have to say it’s nice to be able if any blockages tho. Here’s few pics I’m gonna put some acrylic on the top

It’s 4080 aluminium profile with 8mm slot you can slide rail clamps in the slot

Thanks It’s 40mm push fit waste pipe and a coupler cut in half. 38mm Charnwood hose fits over the pipe perfectly

Hello everyone I’ve recently found this forum I’ve never posted any of my projects before on any site so thought I would start with my most recent project for the work shop and for site work. I used a Bosch GTA2500 mitre saw bench as the base for it so it’s easily transported. I made mft3 style...

I’m gonna do some test glue ups and try some tiger seal that use for bonding car body panels as well

Thanks Droogs That is cyanoacrylate glue and that’s the same as mitre bond/mitre mate will try that first

Thanks Aiden I’ve tried silicone, tec7 to no avail. I’m trying to permanently bond a dewalt extractor fitting to push fit pipe. curt

Couldn’t get the extractor to run with any type of light light but will work with 110v charger when battery is charging not really suitable tho. Needs to be a higher load to activate the extractor.

What would be the best adhesive use to glue push fit waste pipe for my extraction system thanks

thanks for your reply, I tried a led light but that wasn’t enough to switch the extractor on. I see that in the video he use a fluorescent light that uses more power on start up. I will have a try on need to find a suitable light to use

Hi all this is my first post so here goes. I have been in the process of setting up my small 6m x 3m workshop. Most of the time I work on site so my tools are 110v/cordless so need to be easily moved into a van and back in again. I’m now at the extraction stage to keep the dust down by fitting...