Search results

I managed to move my (lightweight in comparison) 165kg Clarke lathe using my trolley jack and a piece of 6x3 wood underneath the legs of it's table whilst i moved it onto an new table. Not easy and a bit of a balancing act - but it worked. See pics.

Spares direct from hegner do seem to be overpriced I got my 1987 vintage Hegner from ebay for £150 - made my own quick release and replaced the blade tightening bolt for a homemade knurled knob - no cost for these mods other than my time :) Blade release is quick and easy. I need to replace...

i've been using a Burgess Bk3 (actually i've got 2 now as they can be got reasonably cheap) mainly due to space available a 2 wheel won't fit as too tall.

Well, for anyone remotely interested based on the number of replies my last post got - lol, I removed the centre bushings they push out neatly and found they where conical shaped with around 1mm play in them I made a replacement out of brass which fitted and rotates nicely with no signs of play...

Sorry for the age old thread resurrection just wanting some assistance on my BK3 if Andy still posts or anyone else able to comment :) My drive wheel (bottom right wheel) has a issue with the centre bush which the bolt goes through appears to be conical shaped, so the wheel wobbles and rattles...

How are you getting on with the Hegner IPCG? - i've also recently got myself a 1992 Hegner 2S and have been trying to source suitable wood to use - got some used laminate flooring but read too many storys about it not being suitable so back to drawing board :)

Thanks AES :) I did have a cam lock from a bike in my bits draw. Unfortunately the hole in it was to big for the pin - hence making the one currently fitted. The Quick release above cost me nothing to make (excluding time) it was all made from bits of scrap I had lying around - lol :D I was...

further update After having sorted out the vibration etc, i've been able to concentrate on doing some upgrades. 1. Thumbscrews for the hold down clamp was first - made from aluminium, next i did the blade quick clamp thumbscrew - made 2, one out of aluminium and one from steel. I didn't think...

cheers both - did the cut test and found it a degree or so out, adjusted table did another cut, adjusted again and another cut - spot on now - and ties up with engineers square to. rgds Gary

where they chrome plated as the 2nd photo looks like the plating has come off indicating poor quality connectors if so. Gary

yeh, me too - was thinking i'd just chucked £150 down the drain, or needing to spend the same again to resolve the issue - phew! :) just need some material now to practice and make something - what would everyone recommend is best to use? cheers Gary

How did the collection go Ken? got home safe and sound i hope. Let us know how you are getting on with it - i've had to do a few maintenance things on my one to get it working properly - see thread asking for help on Multicut 2S for info. rgds Gary

Hi Vono, Forgot to say that the Hammered finishes of hammerite are very good quality and close to the original colours for the Hammered Blue and Greens for the Record vices - i finished one of mine in hammered green and it looks not blingy but factory :) rgds Gary

quick update, update, update :) Think all sorted now. found the motor mount screws where a bit loose so tightened them up and checked the frame mount screws - they where ok. turned on, all quiet on the western front now - little bit of vibration as was still screwed to bench but only with one...

yeh, not the lightest of things to lug around for cleaning are they - lol :)

I've replied to your other thread on vice parts having stripped and rebuilt my three old record vices - not a lot to them, maybe 9 parts in total for each one :) rgds Gary

there are a couple of pins missing that lock the screw in place along with a 'holder' for want of a better word that sits inside the main body. i'll get some photos of my No.2 vice, same design/layout first picture shows where your spring and washer goes - you should have a pin to go through...

quick update, update :) I've managed to straighten the threaded end, not perfect, but considerably better than it was. put it all back together and notice when powered on the front end of the top arm seems to whip/move left to right - only the blade mounted end, can't see anything further...

quick update: 1. I've managed to get the top pivot pin out using a hammer and an M8 bolt to basically bash it out - don't think that's right?? 2. the lower pivot pin can been moved by hand, don't need a wrench to turn it whilst top one needed one to turn. i couldn't turn if by hand - can i...

Any pictures George :)