Search results

If the speaker driver is is a marine driver it should be IP65 rated, it should be suitable for use in a sealed enclosure to maintain the IP rating. You could maybe use a machine screw and a threaded insert as a drain point in case of water ingress. Any holes in a sealed enclosure will more than...

I'm replacing some bench slats that are rotten with new Sapele slats. What sort of finish would you recommend? I was thinking of using a wood preserver or would or a outdoor clear varnish be more suited?

I hate it but is a necessary evil in some cases

I really like Osmo Top oil, easy too apply and looks and feels very nice

I have a Yorkleen WV2, got it on ebay for £40. Its a twin motor unit, probable the same Argus has. Go for a twin motor tho. I would recomend them (specially if you find a second hand one cheap).

It is expensive, even more so now. Where I get it from, in liverpool tho. 18mm Bb/Bb Latvian Birch Combi Plywood 1220X2440 EN636-2 FSC(R) | Beers Timber

I went with this type 48W LED Panel Light Recessed Celing (Cool White 6500 K) 600 x 600 x 10mm | eBay

thanks for the input, I had dodgy crimp on one of the remade cables, its was giving any power to the IO power. Now battling with setup in mach 3, its jogs about smoothly but when I try calibrate the axis its jitters.

I went for the pony jorgensen parallel clamps, they are very nice and put a lot of pressure down and good value I thought. JORGENSEN CABINET MASTER 24" 90 PARALLEL JAW BAR CLAMP - Tools-Warehouse.co.uk, Brand Tools. Value Prices. down side they did take a few weeks to arrive

Is anyone on here any good with CNC's. I've recently built a machine and struggling to get the software operating correctly. The machine is a Bulkman QueenBee PRO, using a digital dream uc300 controller and mach3. Main issue is I can't get the home switches and estop to work, can't get any of...

I've had good luck with grip-it fixings

My Mirka Deros started vibrating a lot, I got fobbed off by the retailer and contacted Mirka uk service directly Master Group | Tool Servicing & Repairs was sorted in 2 weeks, was under warranty tho.

@chuckytfg where did you get upto with the CNC quest? Looking at getting one of the Bulkman QueenBee PRO kits

I use strainers like above with no issues. If your thinning the paint do so first and strain it thinned, goes thought a lot quicker (guess how I found out)

The parallel clamp arrived for me last week. I really like them very much. which did you get Neil?

Thanks for your input sheptonphil. Im tempted to get one when they are back in stock, either use it with the the 2ph extractor or a smaller yorkleen WV2 I have. Either way will get getting a cartridge filter for the 2ph extractor and the bag on it it not too good at keeping dust in.

Hi Pete if you could that would be great thanks

thanks for your reply Pete, very informative. As you mentioned a the 100mm pipe CFM reaches a terminal velocity, would this be as much of a issue when using with a 80mm outlet? (outlet size of my table saw) Would a thien baffle separator be more effective in your opinion. Or is no separator...

Recently acquired a 2hp extractor which I like, it has a filter bag which I do not like. Looking at using a Axminster ACCIH cyclone head with it, dose anyone have/use one? interested in your thoughts of it. Axminster Craft ACCIH Cyclone Interceptor Head Was also going to make a filter box...

I like Osmo top oil. Seem to use it on everything these days.