Search results

-

I am waiting on a load of 9 to 18mm ply to arrive from the cnc router shop. I have a few internal corners that will have a small rad, what is the best way or removing these? I am thinking a new pull saw, but there are just so many to chose from online. thanks

Thanks 👍

Nice clamps 👍 How did you embed the 3D model into you website?

I upgraded my broken evolution with a Bosch, very happy with the saw :) I sometimes wish I had spent more and gone for the Bosch with the folding (rather than sliding) arms to reduce the depth of the saw.

is go ryobi, have been using my started set of a pair of drills for the past few years every day and they are still going strong. Don’t feel as refined as a DeWalt but they do a good job and loads of cheap bare units (especially the blue tools)

And if you are painting it, will the bottom of the V just fill with paint and primer anyway

The t&g cladding I use has a 45 chamfer on the edge giving 90 between the two boards

Can we see a pic of your purchase

Wow that’s very impressive 👊

I’ve sold thousands of things on eBay, a few problems along the way but most people are genuine. I just factored in enough profit that when I had a problem I could afford to take the hit and not feel too sore. give both platforms a go, see if either work for you, what have you to loose?

I am finally fitting extractor ducting in my shop and wonder if I am correct in using the HVLP to remove the dust? I have enclosed around the saw and is currently connected to the HVLP which seems to work ok. would this be better connected to a LVPH such as a Henry? I have seen both setups online.

Thanks, unfortunately they are out of stick at Axminster and Wealden :(

I am looking to find a half decent router bit for cutting finger pulls on kitchen doors. I am trying to work out if I need the Large pulls or small pulls, what would the convention be? (I am thinking large) It would seem that generally the large pulls are only available in 1/2", a problem as I...

Has anyone filed Down the firing pin on their silverline to reduce the dent left on the wood? Good idea or bad?

I did mine in MDF with 6.5mm holes. Also drilled a 2mm hole through the bottom to allow the air in and out of the hole as the bit is inserted & removed

Have you given your local reputable supplier a call and asked for their advise?

I have had a few bits printed by sellers on eBay and found prices to be very reasonable. I most recently used ‘milescobu’ on eBay and he was very cheap but doesn’t appear to be advertising the service any more Either way I think eBay is a great place for finding a supplier

I am looking to buy some iron on edge banding for finishing the edge of some 18mm ply before painting. Looking on ebay, real wood edge banding seems a lot cheaper than I was expecting; ≈ £10 for 20m inc postage. Is cheap ebay edge banding any good or should I be looking to source from a more...

Could you fix at the front with a circular hole in the runner and a horizontal slot further back into the drawers?