Search results

Hey, You could aim to make the faces complimentary rather than each being bang on square. If you have the space either side of the saw, you could clamp both within the blade kerfs distance of each other. Then when you cut through them they should match well even if they are not each perfectly...

I would put a wide strip of masking tape on the back of the board, and another piece of masking tape on the bench, and then superglue the faces of the masking tape on the board and bench together. It holds well while planing, and then is easy to peel off when done. Worth doing a test to make...

I was in a similar position recently, and ended up buying a set of different sized parallel keys, which serves my purposes well enough. I can't post links. But if you search "60 Pcs Imperial Parallel Key Assortment" on ebay, it should get you there. They do a metric set as well, if that is...

I typed this before I read Porkers response, and now realise I've added nothing new! Whoops, sorry.

Hello, I'm new here, but have used a lock-mitre bit to make a few boxes. I also initially had problems with a scary amount of juddering, particularly for the member that has to be held vertically against the fence. Similar to you, I had set the router speed to the lowest setting, 8000rpm. Two...